LumberJocks

ATELIER TABLE

  • Advertise with us
Project by Ivan posted 06-08-2019 07:12 AM 847 views 0 times favorited 17 comments Add to Favorites Watch

I made this atelier table for my daughter. Besides work desk for her study activiies, she needed a table for her hobby painting stuff. So, I came up with simple 18×18mm square iron rod construction with 18mm, 93×53cm pine board, with small drawer. My father in law was welding master, I just made wooden parts and painted iron in black. Table finish -two layers of spray laquer. Table grain direction is due available leftovers.

-- Ivan, Croatia, Wooddicted





17 comments so far

View Mark Wilson's profile

Mark Wilson

2949 posts in 2301 days


#1 posted 06-08-2019 09:50 AM

Ever the practical one, Ivan. Good work.

-- Mark

View Bernard58's profile

Bernard58

131 posts in 2082 days


#2 posted 06-08-2019 10:43 AM

Nice work. Simple yet elegant, and definitely practical. Ik like combinations of metal and wood (although unfortunately my welding skills are poor).

-- Bernard Delaey, Belgium - http://www.delaeywood.be

View Ivan's profile

Ivan

16999 posts in 4105 days


#3 posted 06-08-2019 10:48 AM

Wow!...This was the fastest DT3 …after only 4 hours posted and 63 views!?

Thanks all in advance for all views and comments.

-- Ivan, Croatia, Wooddicted

View doubleDD's profile

doubleDD

10691 posts in 3281 days


#4 posted 06-08-2019 11:53 AM

The table shall fit her needs for any kind of work. Nice Job Ivan. Nice job on the frame too.

-- Dave, Downers Grove, Il. -------- When you run out of ideas, start building your dreams.

View  woodshaver Tony C   's profile

woodshaver Tony C

8251 posts in 4591 days


#5 posted 06-08-2019 12:15 PM

Made to order is better than trying to find the right one! Nice work Ivan! Drawer on the left for a lefty? I’m a lefty and when in school every desk I ever sat in was for a right handed person!
Congrats on your quick… DT3!

-- St Augustine FL, Experience is the sum of our mistakes!

View BB1's profile

BB1

2428 posts in 2086 days


#6 posted 06-08-2019 12:48 PM

Looks great and already being put to use. Nice collaboration with your father in law.

View splintergroup's profile

splintergroup

5843 posts in 2460 days


#7 posted 06-08-2019 01:24 PM

I like the clean design, plenty of leg room. It will get lots of use!

View muesli's profile

muesli

510 posts in 2746 days


#8 posted 06-08-2019 01:30 PM

Congrats on DT3, Ivan! You deserve it.

-- Uwe from Germany.

View justoneofme's profile

justoneofme

862 posts in 3718 days


#9 posted 06-08-2019 01:36 PM

Totally functional without the fuss! I bet your daughter loves it Ivan!!

-- Elaine in Duncan

View Tooch's profile

Tooch

2016 posts in 3114 days


#10 posted 06-08-2019 01:47 PM

Very nice table, that iron will support the short grain for sure!

-- "Well, the world needs ditch-diggers too..." - Judge Smails

View GR8HUNTER's profile

GR8HUNTER

8966 posts in 1950 days


#11 posted 06-08-2019 01:53 PM

your daughter is one lucky girl to have such a talented father i like the short grain its different and will serve its purpose GREAT JOB :<))) GRATZ TOP 3

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN :<))

View Druid's profile

Druid

2205 posts in 4033 days


#12 posted 06-08-2019 09:04 PM

Nicely done Ivan. Don’t forget to let us see some photos with her art on the table.

-- John, British Columbia, Canada

View swirt's profile

swirt

6618 posts in 4210 days


#13 posted 06-09-2019 02:30 AM

That looks very nice majuvia. Does the cross bar on the bottom keep a chair from sliding under? It almost seems like the base needs to be turned around, but I am sure there is a reason.

-- Galootish log blog, http://www.timberframe-tools.com

View Randy M.'s profile

Randy M.

285 posts in 2488 days


#14 posted 06-09-2019 03:18 AM

Nice build simple clean lines and nice construction

-- Do it with your heart in it.........keep sanding

View bushmaster's profile

bushmaster

4135 posts in 3520 days


#15 posted 06-09-2019 05:18 PM

Interesting name for a table, well done.

-- Brian - Hazelton, British Columbia

showing 1 through 15 of 17 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com