LumberJocks

Folding Outfeed Table for Rigid 4512

  • Advertise with us
Project by Dougbkmo3 posted 06-03-2019 01:13 AM 938 views 4 times favorited 3 comments Add to Favorites Watch

Back in April I made a folding outfeed table for my Ridgid 4512 table saw from 1” melamine from a treadmill deck trimmed with 1” maple. Attached with industrial door hinges and a 1” pine board as a spacer. I needed just a little more height so I added 1/8” thick washers between the hinges and the pine. I haven’t made up my mind on legs yet so I am using a roller stand to hold it level, but after a couple of months it works fine and don’t see a need to change at this point. Miter slots were done after the pictures





3 comments so far

View PaulDoug's profile

PaulDoug

2055 posts in 2154 days


#1 posted 06-03-2019 03:07 AM

Very nice looking out feed table.

-- “We all die. The goal isn't to live forever; the goal is to create something that will.” - Chuck Palahniuk

View woodenwarrior's profile

woodenwarrior

247 posts in 2645 days


#2 posted 06-03-2019 03:12 AM

I have an older Rigid 3650, I have racked my brains on how to make an attached outfeed table for mine, which is very similar to yours. Thank you for posting this!!

-- Do or do not...there is no try - Master Yoda

View LittleBlackDuck's profile

LittleBlackDuck

2854 posts in 1271 days


#3 posted 06-03-2019 03:32 AM

Neat use of hardware D’3.


Miter slots were done after the pictures
- Dougbkmo3

Nothing to stop you from adding that picture in #6 slot.

-- If your first cut is too short... Take the second cut from the longer end... LBD

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com