LumberJocks

CREDENZA - prototype

  • Advertise with us
Project by Ivan posted 05-22-2019 06:06 AM 941 views 2 times favorited 21 comments Add to Favorites Watch

I was ordered to make prototype credenza…to analize design and it’s components, to see available and best suitable materials. Also, to see possibilities to make all parts on CNC maschine. All joints were screwed. It’s mainly made of firwood, upper back 10mm pine playwood, bottom back 10mm chipboard, drawer bottoms 3mm MDF. Upper doors were made from one piece, with jigsaw (there was no need to make them as they should be made, by glueing parts). Ofcourse, there are no glass and finish on that credenza, since it is just prototype. Dimensions 110×180 (25cm upper part, 35cm bottom part).

-- Ivan, Croatia, Wooddicted





21 comments so far

View awsum55's profile

awsum55

960 posts in 1587 days


#1 posted 05-22-2019 07:02 AM

That’s a good looking credenza Ivan. What will you end up doing with the prototype? Surely someone will want that even if it’s not made with exotic hardwood.

-- John D, OP, KS

View crowie's profile

crowie

4568 posts in 3029 days


#2 posted 05-22-2019 07:02 AM

Very nicely done Ivan.
I hope someone can keep it after you’ve dual the calculations.

-- Lifes good, Enjoy each new day...... Cheers from "On Top DownUnder" Crowie

View mafe's profile

mafe

13188 posts in 4167 days


#3 posted 05-22-2019 09:01 AM

Fine work on that on.
Did you CNC the parts?
Yes it’s almost a shame, but if it becomes many after, it is fine. As an architect I’m used to making models / prototypes, that will be trashed, but be the way to see details and problems.
Interesting.
Best thoughts,
Mads

-- MAD F, the fanatical rhykenologist and vintage architect.

View anthm27's profile

anthm27

1818 posts in 2188 days


#4 posted 05-22-2019 10:04 AM

Very Nice Ivan, Mate if that,s the prototype then I,m sure the real thing will be outstanding.
Very very nice.
Regards
Anth

-- There is no hope for any of us if we keep apologizing for telling the truth.

View Jim Jakosh's profile

Jim Jakosh

26189 posts in 4184 days


#5 posted 05-22-2019 12:18 PM

Nice work on the credenza, Ivan. Soon there may be 100’s of you design being made!\

Cheers, Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View Tooch's profile

Tooch

2016 posts in 2954 days


#6 posted 05-22-2019 12:34 PM

Looks great Ivan. Those drawer fronts look perfectly lined up, are they false fronts or were you measurements just that good?

Never thought.if using CNC to carve door fronts, makes sense especially if they will be painted. Love the arcs on the doors, that really adds an aesthetic appeal to it

-- "Well, the world needs ditch-diggers too..." - Judge Smails

View doubleDD's profile

doubleDD

10354 posts in 3121 days


#7 posted 05-22-2019 12:40 PM

The prototype looks to be a success. Nice design and it should be a winner. Maybe you get to keep the proyotype for all your work.

-- Dave, Downers Grove, Il. -------- When you run out of ideas, start building your dreams.

View drewpy's profile

drewpy

1046 posts in 2435 days


#8 posted 05-22-2019 01:10 PM

Fantastic prototype, Ivan. I like doing prototypes also. Keep us posted about the real/final build.

-- Drew -- "The greatest wealth is health".

View CampD's profile

CampD

1827 posts in 4564 days


#9 posted 05-22-2019 01:42 PM

Good lookin,....Prototype!

-- Doug...

View pottz's profile

pottz

16781 posts in 2062 days


#10 posted 05-22-2019 02:29 PM

nice design and well made.great job my friend.

-- working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.

View Jerry's profile

Jerry

3488 posts in 2726 days


#11 posted 05-22-2019 05:25 PM

That’s really a fine looking piece of work!

-- There are good ships and there are wood ships, the ships that sail the sea, but the best ships are friendships and may they always be. http://www.geraldlhunsucker.com/

View stefang's profile

stefang

17040 posts in 4412 days


#12 posted 05-22-2019 05:34 PM

Great job on this prototype Ivan, it looks like a nicely finished project to me.

-- Mike, an American living in Norway.

View Orvile Baker's profile

Orvile Baker

276 posts in 1756 days


#13 posted 05-22-2019 07:26 PM

Well done , very nice.

-- Bud Baker , Ojibwa, WI. http://papabudswoodtoys.webs.com/

View a1Jim's profile

a1Jim

118162 posts in 4655 days


#14 posted 05-22-2019 07:38 PM

I like it very good design and build.

-- https://www.artisticwoodstudio.com/videos

View therealSteveN's profile (online now)

therealSteveN

7666 posts in 1652 days


#15 posted 05-22-2019 10:08 PM

Ivan that is awesome. A Pine prototype, does that mean I have to call you Norm now :-)

Nice work. That is some fine looking firewood.

-- Think safe, be safe

showing 1 through 15 of 21 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com