LumberJocks Woodworking Forum banner

Project Information

Time for a new push stick. Time to build a jig. I wanted to keep a couple of push sticks handy to avoid using the same one for all cuts and destroying the bottom and having to throw it away. I used 1.5" x 1.5" for the handle and 1/2" for the body. I cut a 7" piece and cut 1/2" slots with the dado blade. The handle is at 60 degrees to the body. I cut a slot in the body with the dado to fit onto the handle. A little glue and trim the bottom 1/2" from the body. Now I can make a bunch at a time and always have a few at hand.

Gallery

Comments

Top