LumberJocks

Adirondack Style 3 Height Table

  • Advertise with us
Project by Phil B. posted 04-24-2019 11:42 AM 689 views 5 times favorited 13 comments Add to Favorites Watch

Finished the Tall Tables to go with my Tall Chairs !
I used the front legs of the arm chairs to give the same outward camber that makes the tables very stable. The cross braces are the same pattern as the chair leg braces, doubled and half-lap jointed in the middle. The 1 1/2” space will allow for a market umbrella if you drill a hole in the middle table slat. The legs are attached to corner braces in the 2” skirt, making it easy for disassembly for storage if needed. Like my Patio Set tables, the top of the legs are under the side slats and won’t collect rainfall.

Like the chair plans, the table is 3 heights by cutting at marked lines on the leg pattern. There are 2 hole locations and brace lengths for the Counter table and the Deck & Bar table. The legs are wider and and the brace is higher than the chair footrests and the skirt is 1/4” higher than the arms of the chairs in each height, allowing them to go further under the table.

Hope to have the plans finished by May 1st.

Thanks for looking.

P.S…...made the table top into a 24” as well….included in the plans…now available on Etsy in digital

-- Phil, http://www.plansinwood.com DWG files at https://www.etsy.com/ca/shop/TheBarleyHarvest?section_id=13930514&ref=shopsection_leftnav_3





13 comments so far

View stefang's profile

stefang

16700 posts in 3692 days


#1 posted 04-24-2019 12:53 PM

Love this stylish table and chairs.

-- Mike, an American living in Norway.

View CaptainSkully's profile

CaptainSkully

1610 posts in 3916 days


#2 posted 04-24-2019 03:12 PM

Wow, Phil! These are really nice! I just refinished my beach chairs as they live out next to our fire pit. Looking at the folding chairs, but these really might make me rethink that. Our madrona tree is pretty low over our patio, so I’ll have to check out the height options when you publish the plans. I just checked out your site again the other day. I need arms for the chairs next to the fire pit, so may just save the beach chairs for camping and boating outings. Hope your plans are selling like hotcakes. Take care.

-- You can't control the wind, but you can trim your sails

View mahdee's profile

mahdee

4277 posts in 2125 days


#3 posted 04-24-2019 04:46 PM

They look very nice. Are the materials prototype of certain painted wood?
Thanks

-- earthartandfoods.com

View toyguy's profile

toyguy

1689 posts in 4195 days


#4 posted 04-24-2019 04:49 PM

Boy I really like what you have done here. We have been looking at a bar height set for out on the deck….but have not seen anything I like as much as this. I certainly would be interested in a set of plans ….....

-- Brian, Ontario Canada,

View Phil B.'s profile

Phil B.

185 posts in 1612 days


#5 posted 04-24-2019 05:04 PM



Wow, Phil! These are really nice! I just refinished my beach chairs as they live out next to our fire pit. Looking at the folding chairs, but these really might make me rethink that. Our madrona tree is pretty low over our patio, so I ll have to check out the height options when you publish the plans. I just checked out your site again the other day. I need arms for the chairs next to the fire pit, so may just save the beach chairs for camping and boating outings. Hope your plans are selling like hotcakes. Take care.

- CaptainSkully

Thanks Chris….appreciate all the comments recently….and yup, the chair plans are selling very well. I will have a combo package as well with the tables. Check out what my Customer DSwoodsolutions in Orlando is doing with the Deck chair in Baltic plywood and domino’s….look Ma…no screws or plugs…lol. The whole chair is cut out of one 4×8 sheet.

-- Phil, http://www.plansinwood.com DWG files at https://www.etsy.com/ca/shop/TheBarleyHarvest?section_id=13930514&ref=shopsection_leftnav_3

View Phil B.'s profile

Phil B.

185 posts in 1612 days


#6 posted 04-24-2019 05:07 PM



They look very nice. Are the materials prototype of certain painted wood?
Thanks

- mahdee

Thanks…yes, they are all just natural HD knotty pine shelf boards and 2×10’s. I will be spray painting them with Solignum Bright White marine enamel to match all my others.

-- Phil, http://www.plansinwood.com DWG files at https://www.etsy.com/ca/shop/TheBarleyHarvest?section_id=13930514&ref=shopsection_leftnav_3

View Phil B.'s profile

Phil B.

185 posts in 1612 days


#7 posted 04-24-2019 05:10 PM



Boy I really like what you have done here. We have been looking at a bar height set for out on the deck….but have not seen anything I like as much as this. I certainly would be interested in a set of plans ….....

- toyguy

Thanks Brian….buy them off eBay.ca when I get them uploaded in a week or so. That way you don’t pay 1.29 exchange since they are sold to Canucks only in CDN funds.

-- Phil, http://www.plansinwood.com DWG files at https://www.etsy.com/ca/shop/TheBarleyHarvest?section_id=13930514&ref=shopsection_leftnav_3

View swirt's profile

swirt

3868 posts in 3329 days


#8 posted 04-25-2019 01:10 AM

Looks like a perfect match to the chairs.

-- Galootish log blog, http://www.timberframe-tools.com

View Phil B.'s profile

Phil B.

185 posts in 1612 days


#9 posted 04-25-2019 01:43 AM


Looks like a perfect match to the chairs.

- swirt

Thanks…..I decided today to also make a 24” table top and cross braces for the plans, if you guys wanted a smaller table just for drinks and snacks. This is the Deck height….looks good so far. Will post a pic when done.

-- Phil, http://www.plansinwood.com DWG files at https://www.etsy.com/ca/shop/TheBarleyHarvest?section_id=13930514&ref=shopsection_leftnav_3

View majuvla's profile

majuvla

14353 posts in 3225 days


#10 posted 04-25-2019 09:34 AM

Beautiful…at least one Adirondak where you can get up normaly.

-- Ivan, Croatia, Wooddicted

View Phil B.'s profile

Phil B.

185 posts in 1612 days


#11 posted 05-02-2019 12:18 AM

Plans now available on my Etsy page in digital download. Mailed patterns on the weekend.

-- Phil, http://www.plansinwood.com DWG files at https://www.etsy.com/ca/shop/TheBarleyHarvest?section_id=13930514&ref=shopsection_leftnav_3

View bucolic's profile

bucolic

10 posts in 21 days


#12 posted 05-02-2019 01:16 AM

Love them! Very nice :)

-- Brian, Amatuer Woodworker Hack

View Phil B.'s profile

Phil B.

185 posts in 1612 days


#13 posted 05-02-2019 12:38 PM

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com