LumberJocks

Sliding lid box

  • Advertise with us
Project by Canon posted 04-17-2019 12:32 AM 609 views 2 times favorited 12 comments Add to Favorites Watch

Found some rare spalted maple at my supply store and figured cherry mixed with some regular cherry blanks. These are sliding lid jewelry boxes. They are about 2 inches tall and approx 5×7





12 comments so far

View swirt's profile

swirt

3879 posts in 3337 days


#1 posted 04-17-2019 01:51 AM

Beautiful wood. Nice work too.

-- Galootish log blog, http://www.timberframe-tools.com

View LittleBlackDuck's profile

LittleBlackDuck

2513 posts in 1185 days


#2 posted 04-17-2019 03:56 AM

Nice work, but do you speak with forked tongue… are the sliding or do they actually pivot?

-- If your first cut is too short... Take the second cut from the longer end... LBD

View majuvla's profile

majuvla

14393 posts in 3232 days


#3 posted 04-17-2019 04:34 AM

I like that way of opening.

-- Ivan, Croatia, Wooddicted

View drewpy's profile

drewpy

877 posts in 1722 days


#4 posted 04-17-2019 12:55 PM

Nicely done and attractive wood.

-- Drew -- "The greatest wealth is health".

View AJ1104's profile

AJ1104

773 posts in 2024 days


#5 posted 04-17-2019 03:36 PM

Great lid design. I love the overall look of this box.

-- AJ

View ralbuck's profile

ralbuck

5966 posts in 2631 days


#6 posted 04-17-2019 03:57 PM

Very pretty pair!

I also wqant to know if the lids pivot or slide off somehow?

-- Wood rescue is good for the environment and me! just rjR

View Canon's profile

Canon

70 posts in 1314 days


#7 posted 04-17-2019 04:06 PM

Sorry all this is a pivot not sliding lid

View therealSteveN's profile

therealSteveN

2633 posts in 939 days


#8 posted 04-17-2019 09:55 PM

Sliding, pivoting, whatever they are different, and very nice.

Thanks for posting.

-- Think safe, be safe

View tomd's profile

tomd

2204 posts in 4135 days


#9 posted 04-17-2019 11:57 PM

Nice work, very attractive boxes.

-- Tom D

View BB1's profile

BB1

1360 posts in 1213 days


#10 posted 04-18-2019 01:55 AM

What did you use for the pivot point? Very neat design.

View Canon's profile

Canon

70 posts in 1314 days


#11 posted 04-18-2019 02:06 AM

it’s about. 1/8 of inch thick metal rod

View Rwolinski's profile

Rwolinski

116 posts in 690 days


#12 posted 04-22-2019 01:28 AM

Nice unique box Well done.

-- I love the smell of sawdust in the morning....

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com