Pocket hole workstation

  • Advertise with us
Project by GlassImpressions posted 04-13-2019 12:53 PM 1283 views 2 times favorited 2 comments Add to Favorites Watch

This is my first iteration of my bench top pocket hole assembly station. It is comprised of two sheets of 5/8” melamine. It has slots in the back for angle brackets to set the angle. I am designing the second iteration to sit on a large bank of drawers for storage. I will also remove the left fence as I really didn’t find myself using it to register parts. If your rails are cut at 90 degrees the pocket holes will pull them tight and square. FYI, accidentally put pocket holes in the stiles. I will post the second iteration when it is complete. Follow me on Instagram if you want to see the process. @andyglassimpressions

-- Glass Impressions. Please check out my YouTube Channel!

2 comments so far

View EugdOT's profile


319 posts in 1472 days

#1 posted 04-13-2019 02:27 PM

You ain’t screwing around. That’s a monster of a work area. Does it go flat to 90 or does it stay angled?

View dannmarks's profile


1018 posts in 1498 days

#2 posted 04-14-2019 01:31 AM

Beautifully done…

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics