LumberJocks

Thin strippers - for short and long strips (post)

  • Advertise with us
Project by mafe posted 03-29-2019 01:09 AM 958 views 0 times favorited 9 comments Add to Favorites Watch

Thin strippers
for short and long strips

Here a couple of jigs I made yesterday, some call them rippers, but I find that kind of barbaric (Jack the Ripper) and since you can strip in all directions, not just rip and often in fiber boards also, then strippers must be the right name – even if some may lift an eyebrow, but as we say in Denmark ‘for the pure, every thing is pure’. ;-)

The stripper jig with the handle is for short strips and the one mounted on the gauge is for long strips, specific for a Festool table, but same princips can be used on any table saw.

The post is from the blog: https://www.lumberjocks.com/mafe/blog/129568 where you can read much more.


Pictures:
1. The short stripper on the wall, next to half the man he used to be and my daughter laughing.
2. The stripper running up the fence.
3. Sawing the rabbet.
4. Backing strips.
5. Saving the handle on the band saw.
6. The long strip jig for the Festool table.

Hope it can be to some inspiration, perhaps even a thin stripper…

Best thoughts,

MaFe

-- MAD F, the fanatical rhykenologist and vintage architect. Democraticwoodworking.





9 comments so far

View Ivan's profile

Ivan

15062 posts in 3375 days


#1 posted 03-29-2019 05:27 AM

Very xlever idea for those who hasn’t miter saw

-- Ivan, Croatia, Wooddicted

View Brit's profile

Brit

7799 posts in 3350 days


#2 posted 03-29-2019 09:51 AM

Great idea Mads and beautifully executed. The short version looks a lot safer than the one you had originally. Now they will always be to hand and you can strip with confidence, although I would recommend wearing clothes when cutting wood.

Give my regards to Mathilde.

-- Andy - Old Chinese proverb says: "If you think something can't be done, don't interrupt man who is doing it."

View Jim Jakosh's profile

Jim Jakosh

23368 posts in 3613 days


#3 posted 03-29-2019 10:33 AM

Neat idea, Mads!!

cheers, Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View Schwieb's profile

Schwieb

1893 posts in 3969 days


#4 posted 03-29-2019 11:24 AM

Nice work, Mads

-- Dr. Ken, Florida - Durch harte arbeit werden Träume wahr.

View antkn33's profile

antkn33

62 posts in 3950 days


#5 posted 03-29-2019 12:45 PM

I prefer thin strippers.

View jerkylips's profile

jerkylips

495 posts in 3078 days


#6 posted 03-29-2019 02:00 PM


I prefer thin strippers.

- antkn33


are you…sure?

View drewpy's profile

drewpy

966 posts in 1864 days


#7 posted 03-29-2019 04:14 PM

Great idea Masds. Thanks for posting.

-- Drew -- "The greatest wealth is health".

View stefang's profile

stefang

16730 posts in 3841 days


#8 posted 03-29-2019 04:42 PM

Another winner!

-- Mike, an American living in Norway.

View mafe's profile

mafe

12104 posts in 3597 days


#9 posted 04-09-2019 01:42 PM

Hi guys,
stefang, yabadabadooo!
drewpy, thank you back.
Schwieb, thanks.
Jim J, smiles here.
majuvla, I see what you mean, but it can be used for longer pieces than a miter saw, do you get it. Thanks.
Brit, ha ha ha, laughing big time, yes I promise to wear clothes when stripping, otherwise it might get sticky…
jerkylips, ha ha ha, I start doubting.
antkn33, some like them thin, Some Like It Hot…
Best smiles, laughs and innocent thoughts,
Mads

-- MAD F, the fanatical rhykenologist and vintage architect. Democraticwoodworking.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com