LumberJocks

Snowplow Dolly

  • Advertise with us
Project by falatocpa posted 03-28-2019 12:28 AM 841 views 0 times favorited 2 comments Add to Favorites Watch

I built a dolly for my plow. Now the plow comes to the truck instead of vice versa. Much easier, and it isn’t stuck wherever I drop it off until next winter.

Follow up: put the plow on the other week. This thing worked like a dream. I wheeled the plow right up to the truck, the pins popped right into place when set, and I only had to connect the cables and pull up the stand. No jockeying the truck to drive into position. It went on in 10 minutes solo, and that was my first time ever putting it back on. I’ll bet I have it down to 3 minutes next year.





2 comments so far

View ralbuck's profile

ralbuck

6600 posts in 3152 days


#1 posted 03-28-2019 11:26 PM

Nice.
Are the wheels on the dolly large enough; or does the plow get stored indoors.

Hopefully you get it on the truck before you need it!

-- Wood rescue is good for the environment and me! just rjR

View falatocpa's profile

falatocpa

71 posts in 3016 days


#2 posted 04-03-2019 03:31 PM

If you’re asking about weight, plenty. They’re rated to 600 lbs each. If you mean can it go on dirt, no. Not without boards or something to distribute weight. In a few years I plan to move it inside.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com