LumberJocks

Band saw boxe

  • Advertise with us
Project by Phil1961 posted 03-27-2019 01:11 AM 802 views 4 times favorited 11 comments Add to Favorites Watch

Just completed what I call the twins, walnut and maple, finished with water based poly. The flocking really does reduce the sanding time as it hides saw cuts.





11 comments so far

View htl's profile

htl

4817 posts in 1668 days


#1 posted 03-27-2019 02:41 AM

WOW Nice job!!!!!
One is nice, two that work together is outstanding!!!

-- An Index Of My Model making Blogs http://lumberjocks.com/htl/blog/116729

View therealSteveN's profile

therealSteveN

3883 posts in 1083 days


#2 posted 03-27-2019 04:45 AM

A Couple of really nice BS boxes, you have a gift for making them, and it’s getting better. I love me some whimsy, and between the playful shape, and those not store bought pulls, they are whimsical.

Nice job, thanks for posting.

-- Think safe, be safe

View ZAGREB's profile

ZAGREB

1252 posts in 2158 days


#3 posted 03-27-2019 06:47 AM

very nice

-- bambi

View wncguy's profile

wncguy

455 posts in 2821 days


#4 posted 03-27-2019 12:13 PM

Very nice design & execution. Can’t see the cut entry lines either.
What blade width & tpi did you use?

-- Any man can be a father, but it takes someone special to be a Dad

View Phil1961's profile

Phil1961

34 posts in 566 days


#5 posted 03-27-2019 06:06 PM



Very nice design & execution. Can t see the cut entry lines either.
What blade width & tpi did you use?

- wncguy

I use a 3/16 – 4 TPI, seems to do the trick for most curves, even the more challenging ones.
Thanks for your comment.

View Hawaiilad's profile

Hawaiilad

3374 posts in 3529 days


#6 posted 03-27-2019 09:45 PM

I really like those boxes. A few years ago I built something like that, except the design was a sailboat. Is this your design?

-- Larry in Hawaii,

View Phil1961's profile

Phil1961

34 posts in 566 days


#7 posted 03-27-2019 10:06 PM

Thanks, no this is not my design, however I did not follow the original size, etc, I believe I saw this on Youtube

View Phil1961's profile

Phil1961

34 posts in 566 days


#8 posted 03-27-2019 10:07 PM



I really like those boxes. A few years ago I built something like that, except the design was a sailboat. Is this your design?

- Hawaiilad

Thanks, no this is not my design, however I did not follow the original size, etc, I believe I saw this on Youtube

View AJ1104's profile

AJ1104

835 posts in 2168 days


#9 posted 03-28-2019 12:57 AM

Great build on these bandsaw boxes. This is among the nicest I’ve seen. I like your selection of woods and your finish as well.

-- AJ

View wncguy's profile

wncguy

455 posts in 2821 days


#10 posted 03-28-2019 12:55 PM

Phil –
I’m using the same blade width & tpi for most of my boxes too… perhaps not with the same success as you though.

If you don’t mind sharing, did you achieve the “sharp” corners on the drawers by making complete horizontal cuts on the box body & then doing the verticals?
Thanks.

-- Any man can be a father, but it takes someone special to be a Dad

View Ivan's profile

Ivan

15063 posts in 3376 days


#11 posted 03-30-2019 12:47 PM

Unique …kind of ’’cabinet’’ design

-- Ivan, Croatia, Wooddicted

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com