LumberJocks

End Grain Cutting Board

  • Advertise with us
Project by Duckster posted 03-26-2019 01:35 AM 551 views 0 times favorited 16 comments Add to Favorites Watch

I really enjoyed creating this board. Made with Walnut, Paddak, White Ash and Flaming Maple. As you build these End Grain boards, it’s fun to see them come together on the second cuts. I made this board 13”x16”, 1 1/4” thick.
I just finished it with Mineral Oil.
Hope you enjoy

-- Duckster, Texas. {Any day of fishing, Beats a good day at work.} Wash your feet and love Jesus





16 comments so far

View GR8HUNTER's profile

GR8HUNTER

5826 posts in 1041 days


#1 posted 03-26-2019 01:44 AM

the Padduk really pops on this board GREAT JOB :<))

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN

View drewpy's profile

drewpy

844 posts in 1686 days


#2 posted 03-26-2019 02:44 AM

Great looking boards.

-- Drew -- "The greatest wealth is health".

View therealSteveN's profile

therealSteveN

2362 posts in 903 days


#3 posted 03-26-2019 05:27 AM



the Padduk really pops on this board GREAT JOB :<))

- GR8HUNTER

Yes it does, makes it look like a flash is going off. BLING!!!!!!!!!!!!!!

-- Think safe, be safe

View DonB's profile

DonB

558 posts in 3021 days


#4 posted 03-26-2019 07:18 AM

Yes it is beautiful. Can’t believe someone’s going to make a mark on it by cutting on it. How ‘bout plastic knives.

-- DonB

View Roger's profile

Roger

20993 posts in 3133 days


#5 posted 03-26-2019 09:53 AM

Very snazzy

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. [email protected]

View mahdee's profile

mahdee

4177 posts in 2096 days


#6 posted 03-26-2019 11:26 AM

Agree with others; it came out looking very nice.

-- earthartandfoods.com

View Ken Flood's profile

Ken Flood

3 posts in 104 days


#7 posted 03-26-2019 12:09 PM

Great job. Haven’t tried one yet, a little afraid I would screw it up, found the plans for one so when I work up the courage i’ll Give it a try.

-- Ken Flood

View Duckster's profile

Duckster

395 posts in 1679 days


#8 posted 03-26-2019 12:58 PM

Thanks guys for the cuddos.
Go for it Ken. Mistakes are learning curves.

-- Duckster, Texas. {Any day of fishing, Beats a good day at work.} Wash your feet and love Jesus

View pottz's profile

pottz

4711 posts in 1313 days


#9 posted 03-26-2019 01:41 PM

i dont comment on cutting much because their are a million of em posted here but this one is just eye popping,the combo of wood in that pattern is gorgeous,great job duckster.

-- sawdust the bigger the pile the bigger my smile-larry,so cal.

View stefang's profile

stefang

16662 posts in 3663 days


#10 posted 03-26-2019 01:50 PM

Eye candy!

-- Mike, an American living in Norway.

View Rick  Dennington's profile

Rick Dennington

6476 posts in 3523 days


#11 posted 03-26-2019 04:19 PM

Stellar job, Duck…..!! This is seriously nice….I would not make something like this board for people to hack and cut on….A gift that should be admired. Lots of work went into making this board, and the patterns are super…..Hope you’re getting in some good fishing….I haven’t fished in over 2 years because of rotator cuff surgery, then recently had spinal fusion…So I’m laid up for a while….No shop time, either…..Just healing time..Be back at it soon, though.

-- " At my age, happy hour is a 2 hour nap".....!!

View majuvla's profile

majuvla

14166 posts in 3196 days


#12 posted 03-26-2019 07:43 PM

Great looking wood and colours. Pattern is pretty demanding too.

-- Ivan, Croatia, Wooddicted

View Duckster's profile

Duckster

395 posts in 1679 days


#13 posted 03-27-2019 02:01 AM

Thanks guys.
Sorry to hear you’ve been down Rick. Rangers cause them problems

-- Duckster, Texas. {Any day of fishing, Beats a good day at work.} Wash your feet and love Jesus

View rackjabbit's profile

rackjabbit

47 posts in 2236 days


#14 posted 03-30-2019 04:57 AM

Great work and combination of wood. the contrast is complimentary. I hope it gets a lot of very good use.

-- Once the dust settles, breath and behold the beauty of the wood.

View Duckster's profile

Duckster

395 posts in 1679 days


#15 posted 03-30-2019 01:28 PM

Thanks jackrabbit

-- Duckster, Texas. {Any day of fishing, Beats a good day at work.} Wash your feet and love Jesus

showing 1 through 15 of 16 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com