LumberJocks

My new truck

  • Advertise with us
Project by Orvile Baker posted 03-21-2019 09:49 PM 894 views 0 times favorited 15 comments Add to Favorites Watch

Well last time I was here someone let me know that I need to add more details . I am not a writer so I will do my best. This truck started out as plan # 207 from Aschi’s Plans. Well I tried to make one of Peter’s truck , but as usual I could not stick to a plan. His plans are fun and easy. I just seem unable to follow a plan. All hooked up it about 36” and for me it’s about a week to build. It has a lot of pine, oak, maple, ash, and little mahogany here and there.

-- Bud Baker , Ojibwa, WI. http://papabudswoodtoys.webs.com/





15 comments so far

View htl's profile

htl

4984 posts in 1837 days


#1 posted 03-21-2019 10:18 PM

We do love to hear the rest of the story. LOL
Making your trailers your first picture I passed it up the first couple a times [not knowing what it was] I looked in here then final read the title and found this great truck and trailer. Cool!!!
The truck and trailer decks are super nice and love the safety bars behind the cab.

-- An Index Of My Model making Blogs https://www.lumberjocks.com/htl/blog/130264

View GR8HUNTER's profile

GR8HUNTER

7176 posts in 1390 days


#2 posted 03-21-2019 10:51 PM

i just love all the fine looking details on this truck from the eagle to the beds GREAT JOB :<)))))))

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN

View Pjonesy's profile

Pjonesy

349 posts in 1503 days


#3 posted 03-21-2019 11:03 PM

Nice truck, well done.

-- Don't tell me it can't be done.

View LittleBlackDuck's profile

LittleBlackDuck

3843 posts in 1498 days


#4 posted 03-21-2019 11:12 PM

You chearning these great models out in your workshop or on your photo copier?

Thanks for the xtra info OB1... If your response is to me, I’m not after a 400 page tome but just a tad more than a brief narrative. After all the time you spend on it/tem, you deserve more bragging right anmd while I hate reading I’m interested in the story (and any oopsies if applicable).

What, where, how is the skinny on the eagle?

-- If your first cut is too short... Take the second cut from the longer end... LBD

View stefang's profile

stefang

17039 posts in 4011 days


#5 posted 03-22-2019 12:02 AM

Nice work!

-- Mike, an American living in Norway.

View oldrivers's profile

oldrivers

2045 posts in 2244 days


#6 posted 03-22-2019 12:35 AM

That is a great looking Truck, I love the detail.

-- Soli Deo gloria!

View ralbuck's profile

ralbuck

6466 posts in 2944 days


#7 posted 03-22-2019 01:38 AM

Absolutely a great model!

-- Wood rescue is good for the environment and me! just rjR

View recycle1943's profile

recycle1943

3897 posts in 2299 days


#8 posted 03-22-2019 02:41 AM

Very nice attention to detail – love the eagle

-- Dick, Malvern Ohio - my biggest fear is that when I die, my wife sells my toys for what I told her I paid for them

View Ivan's profile

Ivan

15733 posts in 3545 days


#9 posted 03-22-2019 05:34 AM

Ooh!... It’s hughe. That undercarriage looks so gooood.

-- Ivan, Croatia, Wooddicted

View crowie's profile

crowie

3497 posts in 2628 days


#10 posted 03-22-2019 10:08 AM

Top truck and trailer Bud.
You’ve done on first class job indeed, well done.
Cheers Peter

-- Lifes good, Enjoy each new day...... Cheers from "On Top DownUnder" Crowie

View Jason1974's profile

Jason1974

251 posts in 1000 days


#11 posted 03-22-2019 11:04 AM

That’s a great looking tractor and trailer. Where did you get the emblem for the hood? That’s pretty slick! thanks for sharing.

-- Jason, Camden, NC -- I didn't do it, Stupid Did!

View Orvile Baker's profile

Orvile Baker

257 posts in 1355 days


#12 posted 03-22-2019 03:13 PM

Eagle , what eagle? Just kidding Duck. I am not looking forward to using the last few I have. The friend that buys most of my trucks sent me 7 of them and ask that I put them on the trucks for him. His story is that that is all he has, he had a friend that is now passed and that friend gave them to him years ago. The story goes that his friend had them made at a jewler for some project he was doing and my friend does not know where. That means that unless I can find someone that sells them, the five I have left will be the end of them.

-- Bud Baker , Ojibwa, WI. http://papabudswoodtoys.webs.com/

View Dutchy's profile

Dutchy

3613 posts in 2846 days


#13 posted 03-22-2019 04:00 PM

A nice one buddy.

-- https://dutchypatterns.com/

View LittleBlackDuck's profile

LittleBlackDuck

3843 posts in 1498 days


#14 posted 03-22-2019 09:54 PM


Eagle , what eagle? ....
- Orvile Baker

Thank for the feedback OB1. I normally avoid non-timber items in models (except for oils, shellac, poly and maybe tyre black), however, there are times when one MUST make an exception.

Was going to commend you on your miniature carving skill and then poo-poo you for painting it silver… however, after gestating over your explanation, you get a reprieve.

-- If your first cut is too short... Take the second cut from the longer end... LBD

View bushmaster's profile

bushmaster

3880 posts in 2960 days


#15 posted 03-23-2019 12:49 PM

Impressive work.k

-- Brian - Hazelton, British Columbia

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com