LumberJocks

Kitchen Table

  • Advertise with us
Project by tynewman posted 03-10-2019 11:53 PM 499 views 0 times favorited 13 comments Add to Favorites Watch

Just finished a new kitchen table for my wife. The top is made out of alder and the bottom is made out of Pine and then painted

-- Ty





13 comments so far

View AJ1104's profile

AJ1104

750 posts in 1992 days


#1 posted 03-11-2019 12:07 AM

Wonderful job

-- AJ

View swirt's profile

swirt

3803 posts in 3304 days


#2 posted 03-11-2019 01:13 AM

That is a great looking table. Nice job.

-- Galootish log blog, http://www.timberframe-tools.com

View pottz's profile

pottz

4752 posts in 1317 days


#3 posted 03-11-2019 02:04 AM

great job on that i really like your base design.that finish is like a mirror what did you use?

-- sawdust the bigger the pile the bigger my smile-larry,so cal.

View ChrisK's profile

ChrisK

2028 posts in 3414 days


#4 posted 03-11-2019 10:10 AM

Great job, really like the leg design.

-- Chris K

View mahdee's profile

mahdee

4212 posts in 2100 days


#5 posted 03-11-2019 02:48 PM

It looks very nice and it has an appealing look to it.

-- earthartandfoods.com

View Alan Young's profile

Alan Young

146 posts in 4053 days


#6 posted 03-11-2019 03:49 PM

I Like this! Very Nice Lines

View James E McIntyre's profile

James E McIntyre

317 posts in 1624 days


#7 posted 03-11-2019 09:07 PM

Great work. What did you use to carve out the slots that hold the table to the base?

-- James E McIntyre

View tynewman's profile

tynewman

36 posts in 44 days


#8 posted 03-12-2019 12:31 AM

Thanks everyone, I really appreciate the feedback. I used a wood conditioner before putting a dark walnut stain on it. I then used a wipe on poly for the finish on the top. I did 5 or 6 coats to get the shine. The round legs pieces are laminated pieces with the miter joints offset. glued it up to the rough size i wanted and then after plaining to thickness I attached them to a board and used my router like a compass to cut the arc.
The slots for the top attachment i cut with a router bit used to cut stile panel groves. I cut them about 1/2 inch longer then the cleat and then squared them out with a chisel.

-- Ty

View therealSteveN's profile

therealSteveN

2383 posts in 906 days


#9 posted 03-12-2019 04:20 AM

I like the design, sometimes those cross buck design tables leave some big time knee knockers, looks like you figured the arc for roominess. Makes a very noce presentation too.

Thanks for sharing.

-- Think safe, be safe

View tynewman's profile

tynewman

36 posts in 44 days


#10 posted 03-12-2019 03:16 PM

Yes! the table we had there before had legs, meaning every time someone sat at the built in bench they had to push the table out, slide in, then pull the table back in. Turned into tug of war with the table.

-- Ty

View ruger's profile

ruger

87 posts in 427 days


#11 posted 03-13-2019 01:39 AM

very nice design, i know you have some time invested in the legs,, but it really paid off.

View dannmarks's profile

dannmarks

865 posts in 914 days


#12 posted 03-14-2019 12:49 AM

Very nice indeed…

View Jarrhead's profile

Jarrhead

76 posts in 3691 days


#13 posted 03-14-2019 02:38 PM

Well done!

-- trn2wud

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com