LumberJocks

Adirondack Tall Chairs

  • Advertise with us
Project by Phil B. posted 03-06-2019 01:26 PM 1190 views 4 times favorited 17 comments Add to Favorites Watch

The Three Graces…LOL. ( you have to know your art, to get that joke) Here are my new Adirondack Tall Chairs done. I had previously posted the Armless Bar Chair, but these have the same arms as my Adirondack Arm Chair.

The Deck chair measures 36” to the top of the curve at the front of the seat, the Bar chair is 30” and the Counter chair is 26”, measuring the standard 24” to the bottom curve of the seat. The plans will include all 4 chairs, as the only difference is the height of the legs and minor changes to the footrests if desired, and the wider seat slats of the armless chair.

These pine chairs will be painted like all my others, and the 2×10 used for the legs makes them solid as a rock and very sturdy due to the slayed leg style. I used the shape of the bottom back slat support, in the back legs braces as well as a filler strip attached with pocket screws to hide the bolts below the seat. The side leg braces act as the footrest supports which are attached by pocket screws as well.

I am now working on the matching tables, and figured out a cool cross brace system today, using the shape of the chair side braces. Again, there will be 3 heights for the table plan as well.

Thanks for looking.

-- Phil, http://www.plansinwood.com DWG files at https://www.etsy.com/ca/shop/TheBarleyHarvest?section_id=13930514&ref=shopsection_leftnav_3





17 comments so far

View pottz's profile

pottz

4752 posts in 1316 days


#1 posted 03-06-2019 02:48 PM

nice chairs i dont think ive seen them in a tall version before.

-- sawdust the bigger the pile the bigger my smile-larry,so cal.

View majuvla's profile

majuvla

14189 posts in 3199 days


#2 posted 03-06-2019 04:32 PM

Very nice variety of sizes, very cute

-- Ivan, Croatia, Wooddicted

View Phil B.'s profile

Phil B.

179 posts in 1586 days


#3 posted 03-06-2019 07:05 PM

Thanks guys. Lots of tall versions out there, but most are stick style legs

-- Phil, http://www.plansinwood.com DWG files at https://www.etsy.com/ca/shop/TheBarleyHarvest?section_id=13930514&ref=shopsection_leftnav_3

View Derrick's profile

Derrick

94 posts in 1470 days


#4 posted 03-07-2019 02:32 PM

These are perfect!!! Ill be purchasing the plans when they’re ready.

View Phil B.'s profile

Phil B.

179 posts in 1586 days


#5 posted 03-07-2019 05:19 PM



These are perfect!!! Ill be purchasing the plans when they re ready.

- Derrick


Thanks Derrick… I hope to have the downloadable version uploaded next week to Etsy.

-- Phil, http://www.plansinwood.com DWG files at https://www.etsy.com/ca/shop/TheBarleyHarvest?section_id=13930514&ref=shopsection_leftnav_3

View Phil B.'s profile

Phil B.

179 posts in 1586 days


#6 posted 03-12-2019 08:18 PM

View EdwardThirlwall1's profile

EdwardThirlwall1

14 posts in 1154 days


#7 posted 03-14-2019 05:38 AM

I am most certainly not a big enthusiast of art but I cannot help myself but admire these lovely chairs. It is good that you decided to take a picture with one of them, else I might mistake them for a miniature which usually comes in dollhouses, don’t you think?

View EdwardThirlwall1's profile

EdwardThirlwall1

14 posts in 1154 days


#8 posted 03-14-2019 05:49 AM

I don’t believe in an antique piece being made available only to a certain gender because its beauty is timeless and can be enjoyed by just about anybody. I personally would want that as my workdesk which can also double up as a TV console once I am done with work.

View Derrick's profile

Derrick

94 posts in 1470 days


#9 posted 03-14-2019 08:06 PM

Just ordered/received my plans. That’s a ton of quality product for $10!!

Thanks for everything Phil!!

View oltexasboy1's profile

oltexasboy1

254 posts in 2036 days


#10 posted 03-15-2019 07:48 PM

I have the original plans, I purchased, for this chair from (POP WOOD) in a PDF I will send you for free if you want it. Send me a private message W/ your email address .

-- "The pursuit of perfection often yields excellence"

View Phil B.'s profile

Phil B.

179 posts in 1586 days


#11 posted 03-17-2019 12:20 AM



I am most certainly not a big enthusiast of art but I cannot help myself but admire these lovely chairs. It is good that you decided to take a picture with one of them, else I might mistake them for a miniature which usually comes in dollhouses, don t you think?

- EdwardThirlwall1

Well….the pic was taken there…in front of the railing…to give perspective to the height of the chairs since my deck is covered in 3’ of snow !!!

-- Phil, http://www.plansinwood.com DWG files at https://www.etsy.com/ca/shop/TheBarleyHarvest?section_id=13930514&ref=shopsection_leftnav_3

View Phil B.'s profile

Phil B.

179 posts in 1586 days


#12 posted 03-17-2019 12:22 AM



I don t believe in an antique piece being made available only to a certain gender because its beauty is timeless and can be enjoyed by just about anybody. I personally would want that as my workdesk which can also double up as a TV console once I am done with work.

- EdwardThirlwall1


Sorry, but I think you are replying to the wrong post

-- Phil, http://www.plansinwood.com DWG files at https://www.etsy.com/ca/shop/TheBarleyHarvest?section_id=13930514&ref=shopsection_leftnav_3

View Phil B.'s profile

Phil B.

179 posts in 1586 days


#13 posted 03-17-2019 12:23 AM



Just ordered/received my plans. That’s a ton of quality product for $10!!

Thanks for everything Phil!!

- Derrick


Thank you very much and send some pics when you are done.

-- Phil, http://www.plansinwood.com DWG files at https://www.etsy.com/ca/shop/TheBarleyHarvest?section_id=13930514&ref=shopsection_leftnav_3

View oltexasboy1's profile

oltexasboy1

254 posts in 2036 days


#14 posted 03-18-2019 07:12 PM


I have the original plans, I purchased, for this chair from (POP WOOD) in a PDF I will send you for free if you want it. Send me a private message W/ your email address .

- oltexasboy1


Let me be clear about what I meant Phil. The plans I have are for “a” tall “adirondack” chair , not “your” specific chairs. I was offering an alternative not trying to undercut you in some way. I have at least 10 different styles of chairs I have gotten plans for over the years, so harm was intended.

-- "The pursuit of perfection often yields excellence"

View pottz's profile

pottz

4752 posts in 1316 days


#15 posted 03-18-2019 11:09 PM


I don t believe in an antique piece being made available only to a certain gender because its beauty is timeless and can be enjoyed by just about anybody. I personally would want that as my workdesk which can also double up as a TV console once I am done with work.

- EdwardThirlwall1

Sorry, but I think you are replying to the wrong post

- Phil B.


yeah i was thinking, what the hell is he talking about-lol.

-- sawdust the bigger the pile the bigger my smile-larry,so cal.

showing 1 through 15 of 17 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com