LumberJocks

VISE QUICK RELEASE ( VERSION 3 )

  • Advertise with us
Project by kiefer posted 02-24-2019 10:08 PM 1259 views 5 times favorited 21 comments Add to Favorites Watch

This is version 3 of my magnet assist vise quick release which I designed and sized the body with the same dimensions as my version 1 quick release so that I could interchange them easily .
I made a video of the function and construction instead of writing a long text to explain it in words .Watch the video at the link below and let me hear your comments.
https://www.youtube.com/watch?v=uRlKoqUoKcM&t=16s
I am out of the shop for a bit longer because of some leg problems and no heat in the shop but I thought I post this to let you know I am still kicking .

-- Kiefer https://www.youtube.com/user/woodkiefer1/videos





21 comments so far

View mdzehr's profile

mdzehr

301 posts in 702 days


#1 posted 02-24-2019 11:50 PM

You’re amazing with your engineering marvels. I would love to spend time with you in your shop heat or no heat just to watch!

-- Mike, Lancaster PA

View LittleBlackDuck's profile

LittleBlackDuck

2384 posts in 1155 days


#2 posted 02-25-2019 12:46 AM

Very inovatiove… the whole concept freom V1.


..... no heat in the shop but I thought I post this….

- kiefer

kief’, post some girlie pictures in the workshop and just wait for the missus to raise some heat!

-- If your first cut is too short... Take the second cut from the longer end... LBD

View Andre's profile

Andre

2550 posts in 2140 days


#3 posted 02-25-2019 01:07 AM

So that’s what you’ve been up to! Thought perhaps got fed up with this crappy Alberta Weather and headed for the coast?

-- Lifting one end of the plank.

View kiefer's profile

kiefer

5654 posts in 3001 days


#4 posted 02-25-2019 01:17 AM

You’re amazing with your engineering marvels. I would love to spend time with you in your shop heat or no heat just to watch!

- mdzehr
You are welcome anytime but bring polar gear

Tonight 6pm – 6am -31°C

Mainly clear with cloudy periods overnight.

THIS IS WHAT i AM DEALING WITH

-- Kiefer https://www.youtube.com/user/woodkiefer1/videos

View kiefer's profile

kiefer

5654 posts in 3001 days


#5 posted 02-25-2019 01:20 AM

Very inovatiove… the whole concept freom V1.

..... no heat in the shop but I thought I post this….

- kiefer

kief , post some girlie pictures in the workshop and just wait for the missus to raise some heat!

- LittleBlackDuck

Tonight 6pm – 6am -31°C
Mainly clear with cloudy periods overnight.
THIS IT FOR TONIGHT there is no poster that would be …...................

-- Kiefer https://www.youtube.com/user/woodkiefer1/videos

View kiefer's profile

kiefer

5654 posts in 3001 days


#6 posted 02-25-2019 01:23 AM

So that s what you ve been up to! Thought perhaps got fed up with this crappy Alberta Weather and headed for the coast?

- Andre
Not much better there I rather watch curling .

-- Kiefer https://www.youtube.com/user/woodkiefer1/videos

View tyvekboy's profile

tyvekboy

1880 posts in 3347 days


#7 posted 02-25-2019 02:19 AM

Like the concept. Thanks for sharing.

-- Tyvekboy -- Marietta, GA ………….. one can never be too organized

View DocSavage45's profile

DocSavage45

8776 posts in 3176 days


#8 posted 02-25-2019 03:03 AM

Klaus,

Wow! You’re kicking with your good leg! Good to see. Get better!

-- Cau Haus Designs, Thomas J. Tieffenbacher

View hoss12992's profile

hoss12992

4131 posts in 2227 days


#9 posted 02-25-2019 03:09 AM

Absolutely blown away with all the stuff you come up. Very impressive buddy

-- The Old Rednek Workshop https://www.facebook.com/theoldrednekworkshoptn

View kiefer's profile

kiefer

5654 posts in 3001 days


#10 posted 02-25-2019 03:13 AM

Like the concept. Thanks for sharing.

- tyvekboy

Thanks Alex
This one took a little experimenting but it was fun and works so well I was pleased in the end .

-- Kiefer https://www.youtube.com/user/woodkiefer1/videos

View kiefer's profile

kiefer

5654 posts in 3001 days


#11 posted 02-25-2019 03:14 AM

Klaus,

Wow! You re kicking with your good leg! Good to see. Get better!

- DocSavage45
Used to but its been a while DOC but it’s getting better .

-- Kiefer https://www.youtube.com/user/woodkiefer1/videos

View kiefer's profile

kiefer

5654 posts in 3001 days


#12 posted 02-25-2019 03:18 AM

Absolutely blown away with all the stuff you come up. Very impressive buddy

- hoss12992

Thanks Hoss
I enjoy it and it can be useful at times and it’s fun to share .

-- Kiefer https://www.youtube.com/user/woodkiefer1/videos

View bushmaster's profile

bushmaster

3601 posts in 2616 days


#13 posted 02-25-2019 04:33 AM

Nice to see you posting again. Missed you and top notch engineering. Will check out your video.

-- Brian - Hazelton, British Columbia

View  woodshaver Tony C   's profile

woodshaver Tony C

6430 posts in 3687 days


#14 posted 02-25-2019 12:01 PM

Good to see your still kicking Klaus! Your version 3 quick release vise is amazing! Nicely done!

If I miss something it’s because I’m still not receiving email notifications.

-- St Augustine FL, Experience is the sum of our mistakes!

View horky's profile

horky

264 posts in 3264 days


#15 posted 02-25-2019 12:41 PM

Klaus,

Glad to see you are doing better and still getting some shop time. Nice fully functional design and execution on the quick release nut.

showing 1 through 15 of 21 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com