LumberJocks

Coffee Table

  • Advertise with us
Project by SampsonTheSailor posted 02-23-2019 10:02 PM 271 views 0 times favorited 0 comments Add to Favorites Watch

I used to work for a carpentry company, and we were helping with constructing a mansion. The customer had requested these giant rafter tails made from cedar, and there were so many discarded pieces that were going to be thrown away, I just couldn’t let them go to waste. I took as many as I could home with me, and they had been sitting in my garage drying and collecting dust for about a year when I decided we needed a new coffee table. I milled down the pieces and made them a little over an inch and a half thick, and used kreg screws to join the top, bottom and sides together. I built a drawer and then used Dark Walnut Dutch Oil on the whole lot, then started coats of polyurethane after 2 days of letting the Dutch Oil soak in and cure. I finally got my desired result, and now it’s sitting in my living room.

-- If I cannot find a way, I will make one





0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com