LumberJocks

Fractal Burned Serving Tray

  • Advertise with us
Project by Jim Jakosh posted 02-10-2019 09:36 PM 1529 views 3 times favorited 27 comments Add to Favorites Watch

This is another item for the upcoming craft show. It is a fractal burned osage orange serving tray with an Oriental flavor. The burned area was inlaid with azurite blue inlay and then the whole item was covered with pour on epoxy resin.

It is 3/4”x 12” x 18”. The back is finished with clear gloss lacquer.

Cheers, Jim

It is sold!

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!





27 comments so far

View mafe's profile

mafe

13078 posts in 4142 days


#1 posted 02-10-2019 09:51 PM

Hi Jim,
You are on fire!
Cool, with the lightening.
Hope all is fine and you find time to smile.
Best thoughts,
Mads

-- MAD F, the fanatical rhykenologist and vintage architect.

View ZAGREB's profile

ZAGREB

1276 posts in 2703 days


#2 posted 02-10-2019 09:51 PM

looks simply to me but art allways looks simply
i realy like your works,Jim
greetings,Bambi

-- bambi

View recycle1943's profile

recycle1943

5289 posts in 2675 days


#3 posted 02-10-2019 10:40 PM

I like it !! nice work Jim

-- Dick, Malvern Ohio - my biggest fear is that when I die, my wife sells my toys for what I told her I paid for them

View lew's profile

lew

13332 posts in 4808 days


#4 posted 02-10-2019 11:11 PM

That is really beautiful!

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

View Kposty's profile

Kposty

8 posts in 1066 days


#5 posted 02-10-2019 11:20 PM

Looking good Jim!

-- Ken Lowell Mi

View Jerry's profile

Jerry

3488 posts in 2701 days


#6 posted 02-11-2019 12:01 AM

Very nice Jim, Beautiful!

-- There are good ships and there are wood ships, the ships that sail the sea, but the best ships are friendships and may they always be. http://www.geraldlhunsucker.com/

View Bob Collins's profile

Bob Collins

2845 posts in 4737 days


#7 posted 02-11-2019 02:15 AM

Very nice burning Jim, like the inlay effect.

-- Bob C, Australia. Your best teacher is your last mistake.

View canadianchips's profile

canadianchips

2632 posts in 4050 days


#8 posted 02-11-2019 02:38 AM

Good looking tray.
Best of luck at the craft show.

-- "My mission in life - make everyone smile !"

View Grumpy's profile

Grumpy

26811 posts in 4904 days


#9 posted 02-11-2019 02:42 AM

good one jim. It’s a bit like reading tea leaves.
I don’t think i’m game to try this. heard too many bad stories.

-- Grumpy - "Always look on the bright side of life"- Monty Python

View doubleDD's profile

doubleDD

10264 posts in 3096 days


#10 posted 02-11-2019 03:28 AM

It is a great looking tray Jim. It should be well welcomed. I see your getting into pouring resin. I’ve been thinking about it.

-- Dave, Downers Grove, Il. -------- When you run out of ideas, start building your dreams.

View Jim Jakosh's profile

Jim Jakosh

26060 posts in 4159 days


#11 posted 02-11-2019 03:52 AM

Thank you all for the nice comments!!

Hi Mads, this one was on fire big time to burn in those deep grooves. I only wish I had a picture of it in the making. The flames were 6” high!!

Hi Dave. I have another pour project just completed today!

Cheers, Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View kiwilynne's profile

kiwilynne

289 posts in 831 days


#12 posted 02-11-2019 04:32 AM

Awesome work!

-- Lynne, New Zealand - Crikey, Aussie is another country, Bro.

View Druid's profile

Druid

2205 posts in 3848 days


#13 posted 02-11-2019 05:12 AM

Should bring a lot of attention at the show Jim. Nice piece.
There might even be references to “Chinese” and “oriental” in comments 22 and 23. ;)

-- John, British Columbia, Canada

View Joe Lyddon's profile

Joe Lyddon

10961 posts in 5105 days


#14 posted 02-11-2019 05:35 AM

Jim,

Beautiful piece!

Confusing… “The burned area was inlaid with azurite blue inlay and then the whole item was covered with pour on epoxy resin.”

Isn’t the whole area BURNED? I see a portion “blue”... but, that is NOT “the burned area”...

You burned out the overall area using your Electricity High Voltage method, right?
... part of it was Inlaid with the Blue?

Very beautiful piece!!

What kind of Pour-on Epoxy did you use?

Are you in AZ now… during the COLD Winter?

Thank you!

-- Have Fun! Joe Lyddon - Alta Loma, CA USA - Home: http://www.WoodworkStuff.net ... My Small Gallery: https://www.ncwoodworker.net/forums/index.php?media/albums/users/joe-lyddon.1389/

View woodbutcherbynight's profile

woodbutcherbynight

8778 posts in 3462 days


#15 posted 02-11-2019 05:57 AM

NICE. Kinda scary messing with the stuff but very cool results.

-- Live to tell the stories, they sound better that way.

showing 1 through 15 of 27 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com