LumberJocks

Resaw fence and table for Bandsaw

  • Advertise with us
Project by TonyArru posted 02-08-2019 03:21 PM 1071 views 4 times favorited 5 comments Add to Favorites Watch

Hello again! So here is another (not so exciting to look at but useful) shop upgrade. I recently came across some free cherry and walnut logs. Aside from turning some of the blanks on my lathe I thought I’d try my hand at making some small boards out of some of them for boxes and projects like that. Which means, milling and resawing.

I was amazed at how simple of a design this was, of course I over built it, but this was made from scraps that I had in my shop mostly 3/4 inch birch plywood and a piece of MDF for flatness.

At its core its just an miter fence from an old table saw, that rides in a 3/4 inch dado, which allows the fence to swivel and adjust for blade drift, resulting in pretty nice cuts so far. The table it clamps to also has a runner that rides in the existing bandsaw table dado, and thats it!

I know its not as exciting as other projects on here, but if this helps someone, as the video that inspired me for this design helped me, then maybe its worth its weight in digital files for others to see.

Thanks for looking!

-- Tony S. Arru, Connecticut





5 comments so far

View doubleDD's profile

doubleDD

8137 posts in 2314 days


#1 posted 02-08-2019 04:30 PM

Nice job. You will find these helpful around the shop. I built one back in 2014 and seem to use it a lot lately.

-- Dave, Downers Grove, Il. -------- When you run out of ideas, start building your dreams.

View NormG's profile

NormG

6415 posts in 3274 days


#2 posted 02-09-2019 12:02 AM

These are just so useful and so much safer to use

-- Norman - I never never make a mistake, I just change the design.

View TonyArru's profile

TonyArru

79 posts in 2485 days


#3 posted 02-11-2019 01:08 PM

Thank you, I am excited to make more accurate re saw cuts and mill some of my own stock.

-- Tony S. Arru, Connecticut

View HokieKen's profile

HokieKen

8206 posts in 1409 days


#4 posted 02-11-2019 01:20 PM

Very well done. I like the simplicity of using the miter gauge to adjust the fence for drift!

-- Kenny, SW VA, Go Hokies!!!

View dannmarks's profile

dannmarks

817 posts in 852 days


#5 posted 02-13-2019 01:13 AM

Always fun to see what others are doing. Cool

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com