LumberJocks

Juice grove in Cutting board jig

  • Advertise with us
Project by Dave posted 02-01-2019 01:15 AM 1172 views 2 times favorited 6 comments Add to Favorites Watch
Juice grove in Cutting board jig
Juice grove in Cutting board jig No picture No picture No picture No picture No picture
Zoom Pictures

Juice grove in cutting board jig, I will try it tomorrow.
Adjustable with clamps

-- Davewh





6 comments so far

View lightweightladylefty's profile

lightweightladylefty

3367 posts in 4166 days


#1 posted 02-01-2019 03:12 AM

Dave,

This looks like a great idea. Let us know how it works out.

L/W

-- Jesus is the ONLY reason for ANY season.

View sheilatequila's profile

sheilatequila

34 posts in 236 days


#2 posted 02-01-2019 09:09 AM

I made a similar jig for juice grooves (and other things). I did it with t-slots and fences. I still need to rig something to hold the power cord and vacuum hose out of the way. On one of my boards, the power cord slipped between the router and fence … on the last corner during the final pass. ^$#$^%*!

-- - "There is no scrap wood, just pieces not yet used"

View bbain32's profile

bbain32

33 posts in 1628 days


#3 posted 02-01-2019 04:07 PM

I made a similar jig. Still tricky to do. The bit tries to pull the router away from the fence sometimes, so you need to push the router hard against the fence.

It would be good to make another fence that would stick on top of the board with 2 sided tape to sandwich the router base so it can’t move away from the fence at all.

View Ivan's profile

Ivan

14793 posts in 3321 days


#4 posted 02-02-2019 08:39 AM

Smart!

-- Ivan, Croatia, Wooddicted

View whope's profile

whope

152 posts in 2899 days


#5 posted 02-02-2019 01:55 PM



I made a similar jig. Still tricky to do. The bit tries to pull the router away from the fence sometimes, so you need to push the router hard against the fence.

It would be good to make another fence that would stick on top of the board with 2 sided tape to sandwich the router base so it can t move away from the fence at all.

- bbain32

What about routing in the other direction? Wouldn’t that pull the router towards the fence?

-- Measure it with a micrometer, mark it with chalk, cut it with an axe.

View dannmarks's profile

dannmarks

961 posts in 1035 days


#6 posted 02-06-2019 06:56 AM

I like your jig.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com