LumberJocks

Chisel / screwdriver rack

  • Advertise with us
Project by Notw posted 01-30-2019 02:30 PM 1078 views 6 times favorited 13 comments Add to Favorites Watch

I had bought a set of Narex chisels a while back and added a few more to that collection so I decided it was time to build a rack to hold them. Used plans from Woodsmith magazine as the basis and then changed the dimensions to my chisels. Like how the chisel rack came out enough I decided to build another one to hold my Narex screwdrivers. Wood used is Mahogony with a BLO finish. Thanks to TravisH for the help with some of the plan details.





13 comments so far

View cmmyakman's profile

cmmyakman

233 posts in 2989 days


#1 posted 01-30-2019 03:11 PM

Nicely done.

-- You can't fail if you don't give up.

View Andre's profile

Andre

2550 posts in 2139 days


#2 posted 01-30-2019 05:06 PM

Looks great and works! How are the Narex screwdrivers?

-- Lifting one end of the plank.

View ralbuck's profile

ralbuck

5908 posts in 2599 days


#3 posted 01-30-2019 05:22 PM

Way to organized; I would never be able to find them!

Looks like a great job.

-- Wood rescue is good for the environment and me! just rjR

View Notw's profile

Notw

708 posts in 2086 days


#4 posted 01-30-2019 05:30 PM



Looks great and works! How are the Narex screwdrivers?

- Andre

I really like the look and feel of them and the fact that the shaft goes full through the handle. My only complaint would be QC on them, it kills my OCD that the name on the handle is not in line with the blade of the flatheads and some of the shafts extend past the wood while others are slightly below the wood. Other than those little things I really like them.

View Oldschoolguy's profile

Oldschoolguy

51 posts in 169 days


#5 posted 01-30-2019 05:57 PM

Great job. I’m in the same process for mine also. However, I’m not into pretty for some things. As long as I can find them.

View Andre's profile

Andre

2550 posts in 2139 days


#6 posted 01-30-2019 06:12 PM


Looks great and works! How are the Narex screwdrivers?

- Andre

I really like the look and feel of them and the fact that the shaft goes full through the handle. My only complaint would be QC on them, it kills my OCD that the name on the handle is not in line with the blade of the flatheads and some of the shafts extend past the wood while others are slightly below the wood. Other than those little things I really like them.

- Notw

I already have a set of Grace flat head drivers was more interested in the philips head as to how they hold up?
Also noticed that there are no Robertson head drivers, must be a set for the U.S., where about you located?

-- Lifting one end of the plank.

View Notw's profile

Notw

708 posts in 2086 days


#7 posted 01-30-2019 07:02 PM


I already have a set of Grace flat head drivers was more interested in the philips head as to how they hold up?
Also noticed that there are no Robertson head drivers, must be a set for the U.S., where about you located?

- Andre

Robertson is in the middle

View Steve Cherry's profile

Steve Cherry

178 posts in 2164 days


#8 posted 01-30-2019 09:14 PM

They look really nice; do you remember which issue the plans are in? I probably have it but have never printed out an index. Thanks

-- Steve - Front Royal, VA

View Notw's profile

Notw

708 posts in 2086 days


#9 posted 01-30-2019 09:24 PM



They look really nice; do you remember which issue the plans are in? I probably have it but have never printed out an index. Thanks

- Steve Cherry

Vol. 32/No. 192

View AJ1104's profile

AJ1104

750 posts in 1992 days


#10 posted 01-30-2019 11:58 PM

Great job. They are a great addition to any shop!

-- AJ

View Woodenwizard's profile

Woodenwizard

1355 posts in 3376 days


#11 posted 01-31-2019 05:19 PM

Oh no! another project to add to my list. Nice Work!

-- John, Colorado's (Wooden Wizard)

View Steve Cherry's profile

Steve Cherry

178 posts in 2164 days


#12 posted 01-31-2019 06:44 PM



Thanks

They look really nice; do you remember which issue the plans are in? I probably have it but have never printed out an index. Thanks

- Steve Cherry

Vol. 32/No. 192

- Notw


-- Steve - Front Royal, VA

View Ken90712's profile

Ken90712

17652 posts in 3521 days


#13 posted 02-03-2019 02:45 PM

Well done.

-- Ken, "Everyday above ground is a good day!"

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com