Miter saw station with wood storage

  • Advertise with us
Project by johns3b posted 12-20-2018 03:43 PM 1658 views 2 times favorited 10 comments Add to Favorites Watch

Hello all,
Here is my miter saw station with lots of wood storage. I have been planning and going over lots of pictures and plans and gathering ideas from this one and that one to make it fit my space and needs. I am very happy with it
Any questions let me know

10 comments so far

View Underdog's profile


1391 posts in 2519 days

#1 posted 12-20-2018 05:08 PM

I’ll bet it’s a relief to have this set up finally. It’s looking good too.
What stop system are you using?

-- Jim, Georgia, USA

View pottz's profile


6008 posts in 1468 days

#2 posted 12-20-2018 05:23 PM

nice setup john thats gonna make life easier.with the dust collection shroud youve made can you still do 45 degree cuts? looks like it would be a problem.

-- sawdust the bigger the pile the bigger my smile-larry,so cal.

View JRAP's profile


97 posts in 2433 days

#3 posted 12-20-2018 09:18 PM

I love the saw enclosure, and the wood rack. Nice job.

-- -- Jim, Cumberland,RI -- Life is all the other stuff you do when you're not in the shop. -

View Scott Oldre's profile

Scott Oldre

1126 posts in 3914 days

#4 posted 12-21-2018 12:01 AM

Looks pretty perfect to me!

-- Scott, Irmo SC

View therealSteveN's profile


3656 posts in 1057 days

#5 posted 12-21-2018 03:21 AM

Looks nice. I too am wondering about the range of the saw now, with the shroud.

Is that 24” storage underneath. Looks like a large lot of cutting boards need to be made….

Thanks for posting.

-- Think safe, be safe

View johns3b's profile


7 posts in 1973 days

#6 posted 12-21-2018 03:31 AM

It sure is a relief to have this finished! I bit the bullet and bought a Kreg track system with stops and tape measure. Money very well spent! It greatly increases accuracy and more importantly my speed.

View johns3b's profile


7 posts in 1973 days

#7 posted 12-21-2018 03:32 AM

Thank you Jim and Scott!

View johns3b's profile


7 posts in 1973 days

#8 posted 12-21-2018 03:36 AM

Thanks Larry,
I can get 45 degrees to the right no problems, close but i can. To tiltbi remove the front plates (1/4 ply). They are screwed on with two screws for easy removal. I have yet to do a compound miter (in years) but i can if need be.

View DonB's profile


569 posts in 3176 days

#9 posted 12-21-2018 08:44 AM

Like the organization. I’d love to have that much wood.

-- DonB

View johns3b's profile


7 posts in 1973 days

#10 posted 12-21-2018 10:06 PM

Thanks Don, I was lucky and got most of that from cabinet building school. It was all wood they were throwing away, that is why I could get it

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics