LumberJocks

Two Axis bowl

  • Advertise with us
Project by Jim Jakosh posted 12-20-2018 02:42 AM 1065 views 2 times favorited 25 comments Add to Favorites Watch

This was a little practice in making a piece in the style of Rudy Lopez. Rudy is coming to the Grand River Turners Guild in March for a demo and training and they showed some of his work at the last meeting. I noticed a beaded edge piece turned on two axis’ and tried to make one.
This is a piece of real dry birch log that was on the firewood pile in the barn. I first turned it from the ends…..turned away the bark and cut beads in the side of the log. Then I turned it from the sides and made the bowl and the beads replaced what would usually be the natural edge. The last shot shows the first turning.

It is 6” long and about 3” diameter and finished with Danish Oil.

Cheers, Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!





25 comments so far

View Tooch's profile

Tooch

2013 posts in 2645 days


#1 posted 12-20-2018 03:34 AM

Cool concept. It took me.a few moments to understand the “2 axis” idea, but I got it now. Very nicely done

-- "Well, the world needs ditch-diggers too..." - Judge Smails

View ralbuck's profile

ralbuck

6541 posts in 3036 days


#2 posted 12-20-2018 03:40 AM

You just “bowled” some of us over. Super neat piece.

-- Wood rescue is good for the environment and me! just rjR

View doubleDD's profile

doubleDD

9459 posts in 2812 days


#3 posted 12-20-2018 03:51 AM

It’s like a tongue twister for turning. Definitely cool and unique Jim. I’m going to keep this one on the future list, way future list.

-- Dave, Downers Grove, Il. -------- When you run out of ideas, start building your dreams.

View Grumpy's profile

Grumpy

26416 posts in 4620 days


#4 posted 12-20-2018 04:03 AM

Amazing effort.

-- Grumpy - "Always look on the bright side of life"- Monty Python

View ZAGREB's profile

ZAGREB

1276 posts in 2419 days


#5 posted 12-20-2018 04:43 AM

amazing bowl

-- bambi

View Jim Jakosh's profile

Jim Jakosh

24781 posts in 3875 days


#6 posted 12-20-2018 05:25 AM

Thanks for the nice comments. This piece took all of 90 minutes to complete. Sanding off the lathe took twice that time!

cheers, Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View BobWemm's profile

BobWemm

2865 posts in 2695 days


#7 posted 12-20-2018 05:28 AM

Nice Jim, I hate the sanding part.

Bob

-- Bob, Western Australia, The Sun came up this morning, what a great start to the day. Now it's up to me to make it even better. I've cut this piece of wood 4 times and it's still too damn short.

View Jim Jakosh's profile

Jim Jakosh

24781 posts in 3875 days


#8 posted 12-20-2018 05:42 AM

Thanks, Bob. I did not dare any sanding on the lathe or I’d have broken my hand in that propeller. I turned it around 1800 to get the best finish so I didn’t have to sand too much, but I still did. It would have come out much better with a harder and maybe a wet/green wood!

Cheers, Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View Ivan's profile

Ivan

15943 posts in 3637 days


#9 posted 12-20-2018 05:53 AM

Pretty unique design.

-- Ivan, Croatia, Wooddicted

View John's profile

John

1809 posts in 2039 days


#10 posted 12-20-2018 06:29 AM

Neat idea Jim, I’ll have to think of some application for this.

-- John, Sunshine Coast, BC, Canada.

View Mark Wilson's profile

Mark Wilson

2826 posts in 1832 days


#11 posted 12-20-2018 08:57 AM

What a concept, Jim That’s nuts. That none of the beads blew out is a wonderment. Pic 4: With what did you roll the beads, Dear Jim? With what? Perchance, a skew?

-- Mark

View Mark Wilson's profile

Mark Wilson

2826 posts in 1832 days


#12 posted 12-20-2018 08:59 AM

Oh, wait. I gotta Favorite this puppy. It’s all that and a great big jar of pickled pigs’ feet.

-- Mark

View recycle1943's profile

recycle1943

4469 posts in 2391 days


#13 posted 12-20-2018 10:09 AM

don’t have a clue what happened but it’s interesting as all get out

-- Dick, Malvern Ohio - my biggest fear is that when I die, my wife sells my toys for what I told her I paid for them

View Bob Collins's profile

Bob Collins

2810 posts in 4453 days


#14 posted 12-20-2018 11:36 AM

Nice work Jim, very effective with the beads in lieu off. Know what you mean with sanding the propeller on the lathe.

-- Bob C, Australia. Your best teacher is your last mistake.

View KimAccurso's profile

KimAccurso

511 posts in 909 days


#15 posted 12-20-2018 01:01 PM

Very nice, Jim! I find it very interesting to read about the turning projects you and others do and all the different tools and methods you use. I may not have a clue what they are but maybe someday!

-- Kim - imperfection is the pursuit of perfection

showing 1 through 15 of 25 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com