LumberJocks Woodworking Forum banner

Comments

· Registered
Carving
Joined
·
477 Posts
thats pretty cool, better than the one I tried to make yesterday. With mine the mitred corners were slightly off which in turn put the whole thing out.
 

· Registered
Joined
·
15 Posts
Mitres can go wrong real easy. Mine aren't the best, but having a right angle clamp or some type of square to clamp to the parts makes a big difference.
 

· Registered
Joined
·
73 Posts
Hi, nice work on this picture frame. I have built a miter jig for my table saw that cuts perfect 45's. If you plan on building a few of these picture frames, I would highly recommend taking the time to build one. I don't have a picture of mine with me right now, but run a search on LJs and you'll probably find many that are worth copying. That is where I found mine.
Good Luck!

Wisty
 

· Registered
Joined
·
15 Posts
Thanks! I would make a miter jig, but my crappy Craftsman table saw has these weird miter slots so i can't really make the jig. So for now just using the miter saw will suffice.
 
Top