LumberJocks

Finchs woodworking logo

  • Advertise with us
Project by kywoodworker posted 11-23-2018 12:33 PM 718 views 0 times favorited 11 comments Add to Favorites Watch

not a wood project but is a soon to be. Had this design made and will make it into wod sign, but had to share it now lol





11 comments so far

View stefang's profile

stefang

16660 posts in 3660 days


#1 posted 11-23-2018 04:14 PM

Great logo!

-- Mike, an American living in Norway.

View GR8HUNTER's profile

GR8HUNTER

5817 posts in 1038 days


#2 posted 11-23-2018 04:15 PM

NICE LOGO :<))

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN

View JCamp's profile

JCamp

951 posts in 877 days


#3 posted 11-23-2018 11:19 PM

Looks good. Now go build ur brand and when ur a millionaire don’t forget us

-- Whatsoever thy hand findeth to do, do it with all thy might

View John Smith's profile

John Smith

1746 posts in 489 days


#4 posted 11-24-2018 12:31 AM

nice layout in the design – how will you fabricate the design ?
what size will it be ?

-- Failure is proof that you at least tried ~ now, go do it again, and again, until you get it right --

View Richard's profile

Richard

11274 posts in 3359 days


#5 posted 11-24-2018 01:01 AM



nice layout in the design – how will you fabricate the design ?
what size will it be ?

- John Smith

Me also!

-- Richard (Ontario, CANADA)

View kywoodworker's profile

kywoodworker

81 posts in 2193 days


#6 posted 11-24-2018 12:09 PM

I’m not sure on size but I plan on cutting it with a scroll saw. I also have a business card in design with this logobut I cant add it in comments I don’t think

View awsum55's profile

awsum55

445 posts in 835 days


#7 posted 11-24-2018 10:01 PM

Very nice logo, but I can tell you from experience as a retired graphic artist/designer that those very thin spaces will plug up if you print the design too small or try to make a brand out of it. When I do logo like that I make several sizes of art with different sized spaces so that I can print it large or small.

-- John D, OP, KS

View kywoodworker's profile

kywoodworker

81 posts in 2193 days


#8 posted 11-24-2018 11:54 PM

Thanks for the info as I do want a branding iron and vinyl out of it
So just tell the designer to add more spacing to it.

View John Smith's profile

John Smith

1746 posts in 489 days


#9 posted 11-25-2018 12:55 AM

yes – properly spaced lettering (called kerning) is very important
in how the general public reads it from a given distance.
business cards, letterhead, rubber stamps, etc is not so critical.
but – a sign on a building from 100 feet away at 40mph – whole different story.
and the branding iron – remember that when a hot iron touches wood,
there is the brown singed “halo” around the burn. so a burning edge
that is 1/16” wide may produce a burned area that is 1/8” or larger wide.
so you must be flexible with your logo for certain projects.
don’t rush it – it will all fall into place.

-- Failure is proof that you at least tried ~ now, go do it again, and again, until you get it right --

View kywoodworker's profile

kywoodworker

81 posts in 2193 days


#10 posted 11-25-2018 02:25 AM

yea I know what kerning is inkscape thanks for the info

View a1Jim's profile

a1Jim

117592 posts in 3903 days


#11 posted 11-25-2018 02:28 AM

Cool logo simple clean and to the point.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com