LumberJocks

platter#2

  • Advertise with us
Project by ZAGREB posted 11-14-2018 12:41 PM 1137 views 0 times favorited 16 comments Add to Favorites Watch

oak
I hope you´ll like it

-- bambi





16 comments so far

View robscastle's profile

robscastle

8345 posts in 3534 days


#1 posted 11-14-2018 12:48 PM

Very nice work Bambi, now a question, I see the jig and the understand the concentric circle OK , but how did you do the curved radial grooves?

-- Regards Rob

View recycle1943's profile

recycle1943

6163 posts in 2952 days


#2 posted 11-14-2018 01:04 PM

Bambi – you’re as close to genius as can be. That fixture is a GREAT idea

-- Dick, Malvern Ohio - my biggest fear is that when I die, my wife sells my toys for what I told her I paid for them

View KimAccurso's profile

KimAccurso

511 posts in 1470 days


#3 posted 11-14-2018 01:17 PM

Incredible design!

-- Kim - imperfection is the pursuit of perfection

View Ivan's profile

Ivan

17133 posts in 4198 days


#4 posted 11-14-2018 01:28 PM

Vraže jedan…počel si pimplati!! Svaka čast na odličnom inžinjerstvu!!

-- Ivan, Croatia, Wooddicted

View  woodshaver Tony C   's profile

woodshaver Tony C

8442 posts in 4683 days


#5 posted 11-14-2018 01:52 PM

Wow bambi this is great! but I only understand some of this…. you must give me more or I’ll go mad. LOL!

-- St Augustine FL, Experience is the sum of our mistakes!

View lew's profile

lew

13480 posts in 5086 days


#6 posted 11-14-2018 04:12 PM

I do like it, a lot!!

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

View Julian's profile

Julian

1676 posts in 4021 days


#7 posted 11-14-2018 06:11 PM

Very nice design and jig.

-- Julian

View michelletwo's profile

michelletwo

2795 posts in 4346 days


#8 posted 11-14-2018 06:56 PM

bambi: go to my pages and look for my tutorial on how to do what you are doing, but no router. totally just turned. It shows picture of it on the lathe and the text tells you how to do it… you might pick up an idea or two on what to do with your router too..have fun!

View Diggerjacks's profile

Diggerjacks

2331 posts in 4469 days


#9 posted 11-14-2018 07:44 PM

Hello my friend

Just a word : fantastic

You are really addicted to woodturning

Congratulations (oups another word !!)

Thanks for sharing

-- Diggerjack-France ---The only limit is the limit of the mind and the mind has no limit

View John's profile

John

2111 posts in 2600 days


#10 posted 11-14-2018 08:30 PM

Seems to be no end to what can be done with some imagination, quite the set up Bambi!

-- John, Sunshine Coast, BC, Canada.

View Jerry's profile

Jerry

3508 posts in 2978 days


#11 posted 11-14-2018 08:50 PM

Very ingenious and very beautiful. My hat’s off to you sir. Great work!

-- There are good ships and there are wood ships, the ships that sail the sea, but the best ships are friendships and may they always be. http://www.geraldlhunsucker.com/

View ralbuck's profile

ralbuck

6795 posts in 3597 days


#12 posted 11-14-2018 09:56 PM

A very fine job and well jigged up too.

-- Wood rescue is good for the environment and me! just rjR

View Jim Jakosh's profile

Jim Jakosh

27225 posts in 4436 days


#13 posted 11-14-2018 10:01 PM

Beautiful platter, Bambi. I like you router setup used to make it!!

Cheers, Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View BobWemm's profile

BobWemm

3071 posts in 3256 days


#14 posted 11-15-2018 05:19 AM

Very impressive Bambi, This one is really good.

Bob

-- Bob, Western Australia, The Sun came up this morning, what a great start to the day. Now it's up to me to make it even better. I've cut this piece of wood 4 times and it's still too damn short.

View Grumpy's profile

Grumpy

26812 posts in 5181 days


#15 posted 11-15-2018 11:09 PM

Bambi, I do like it. That jig looks great.
Are you going to post more on your methodology?.

-- Grumpy - "Always look on the bright side of life"- Monty Python

showing 1 through 15 of 16 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com