LumberJocks

Maple Sink Stand and Counter Top

  • Advertise with us
Project by TucsonTim posted 10-17-2018 02:18 PM 594 views 1 time favorited 4 comments Add to Favorites Watch

Hi LJ’s. This is recently completed sink stand with an edge grain counter top. Pretty straight forward build. It’s constructed from 8/4 Hard Maple with loose tennon joinery. Lots of big lumber on this project. The legs are 3×3 inches square and the top is 1.5 inches thick. The top was glued up in seven different sections. The base was assembled on site (a relative’s new home in Colorado) and the top was trimmed to fit a specific space in the laundry room. The finish is two coats of Minwax Polycrylic. It’s mostly used as a bath for the family dog. Happy to answer any questions. Suggestions, as always, are welcome. Thanks LJ’s…

-- Tim in Tucson





4 comments so far

View Richard's profile

Richard

11291 posts in 3481 days


#1 posted 10-18-2018 12:49 AM

Very Nice Piece Of Work & Well Done Tim.

-- Richard (Ontario, CANADA)

View TucsonTim's profile

TucsonTim

30 posts in 490 days


#2 posted 10-18-2018 02:16 PM

Thanks Rick. I appreciate you taking the time to view and reply to my project…

-- Tim in Tucson

View morath's profile

morath

33 posts in 2637 days


#3 posted 10-20-2018 01:22 AM

That looks very nice. I think that’s the same sink I put in my kitchen a few months ago, but I went with stained pine.

-- My mom says I'm handsome.

View TucsonTim's profile

TucsonTim

30 posts in 490 days


#4 posted 10-20-2018 05:37 PM

Thanks morath. Yeah, that sink is a monster. Very heavy. I was always worried about dropping the darn thing during the build process…

-- Tim in Tucson

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com