LumberJocks

Walnut Table

  • Advertise with us
Project by big_als_workshop posted 09-19-2018 10:04 AM 1424 views 2 times favorited 13 comments Add to Favorites Watch

This is a walnut table that I made for my sister’s new house. I used biscuits for the main panel and loose tenons/dowels on the bread boards. It is finished with five coats of arm r seal, lightly sanded in between each coat. The base is painted with three coats of paint, lightly sanded in between each coat, then finished with two coats of arm r seal.





13 comments so far

View LastingBuild's profile

LastingBuild

75 posts in 367 days


#1 posted 09-19-2018 12:30 PM

Looking Good!

-- LastingBuild

View recycle1943's profile

recycle1943

3129 posts in 2074 days


#2 posted 09-19-2018 12:46 PM

The top is absolutely stunning, the grain pattern, little piece of sap wood, bread boards with dowels – nice nice nice

-- Dick, Malvern Ohio - my biggest fear is that when I die, my wife sells my toys for what I told her I paid for them

View swirt's profile

swirt

4070 posts in 3424 days


#3 posted 09-19-2018 12:59 PM

Very nice!

-- Galootish log blog, http://www.timberframe-tools.com

View helluvawreck's profile

helluvawreck

32086 posts in 3319 days


#4 posted 09-19-2018 01:12 PM

This is an outstanding table. Congratulations and welcome to Lumberjocks.

-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com

View TWegs's profile

TWegs

60 posts in 1068 days


#5 posted 09-19-2018 03:34 PM

Beautiful joinery. Nice work!

View pottz's profile (online now)

pottz

5783 posts in 1437 days


#6 posted 09-19-2018 03:39 PM

nice work and beautiful wood,should make sister a happy lady.

-- sawdust the bigger the pile the bigger my smile-larry,so cal.

View Firewood's profile

Firewood

886 posts in 2086 days


#7 posted 09-19-2018 03:43 PM

Beautiful table. I love the grain of that walnut. Very nice work.

-- Mike - Waukesha, WI

View rolltide35's profile

rolltide35

7 posts in 594 days


#8 posted 09-19-2018 06:29 PM

Great table. I’ve recently made 1 myself. Where did you get the legs? I can’t seem to find a cheap source for tbale legs.

-- Andy in Atlanta....(Actually Suwanee, pretty close)

View IantheTinker's profile

IantheTinker

285 posts in 579 days


#9 posted 09-19-2018 10:07 PM

Looks great! I have never seen dowels used on a breadboard end like that, I really like the look of them. How thick is the walnut?

-- pensivewoodworker.com

View big_als_workshop's profile

big_als_workshop

5 posts in 338 days


#10 posted 09-20-2018 01:19 AM

I got the legs unfinished off of amazon. Definitely not cheap, 140 for 4, but not terrible either. The top started 8/4 but by the time I got it planed and sanded, it was 1.5 inches

View Boneski's profile

Boneski

143 posts in 3585 days


#11 posted 09-20-2018 11:24 PM

It’s beautiful. Nice work.

-- Blinded by brilliance

View LoganN's profile

LoganN

454 posts in 2353 days


#12 posted 09-25-2018 07:58 PM

Hot damn that is a good looking piece of furniture! Nice job on wood selection and design!

View Tundragirl's profile

Tundragirl

1 post in 285 days


#13 posted 11-10-2018 09:52 PM

Very beautiful- I am interested in making a similar table, but because I am a novice woodworker, I would benefit from some detailed instructions- any ideas??

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com