| Project by dannmarks | posted 08-11-2018 01:54 AM | 1987 views | 0 times favorited | 7 comments |  |
 |
A friend was building a new house. These are the stairs that I built for his new home. I had to resaw the 6 inch wide Railing boards down to .175 inches thick and run them thru the plainer down to @ 1/8 inch thick and used the curved wall to clamp the glued up assembly to take on the exact shape of the wall. Each step had to be hand cut to fit because every single step was different. Everyone was happy with the completed project.
7 comments so far
mel52
home | projects | blog
2451 posts in 1762 days
#1 posted 08-11-2018 04:07 AM
Beautiful, and I like the way the rounded inside goes with the straight line outside, ( wall side ).Well done….
-- MEL, Kansas
Ivan
home | projects | blog
17331 posts in 4365 days
#2 posted 08-11-2018 10:04 AM
Magnificant…colosal!!
-- Ivan, Croatia, Wooddicted
Firewood
home | projects | blog
1743 posts in 3132 days
#3 posted 08-11-2018 11:15 AM
Beautiful work. Well done. That would have taken me forever to do – if I could figure out where to start.
-- Mike - Ocala, FL
dannmarks
home | projects | blog
1040 posts in 2079 days
#4 posted 08-12-2018 12:25 AM
I had more energy back then. I was working 2 jobs and doing this on the side… Thank you for the kind words…
bruc101
home | projects | blog
1561 posts in 5040 days
#5 posted 08-12-2018 02:45 PM
I think stair builders are unique woodworkers. Good job on those stairs.
-- Bruce Free Plans & Calculators https://traditionalwoodworking.org
Richard
home | projects | blog
11310 posts in 4530 days
#6 posted 08-12-2018 08:12 PM
Very Nice Indeed & Well Done!
-- Richard (Ontario, CANADA)
Coastwise
home | projects | blog
42 posts in 1377 days
#7 posted 10-02-2018 07:50 AM
Incredible work, have always been in awe of stair builders. And curved!
Have your say...