Portable work table

  • Advertise with us
Project by Walt posted 10-14-2010 11:47 PM 4638 views 0 times favorited 2 comments Add to Favorites Watch
Portable work table
Portable work table No picture No picture No picture No picture No picture
Zoom Pictures

This doubles as an assembly bench and a work bench, It can be moved anywhere in my shop

-- Walt Wilmington Delaware, http://[email protected]

2 comments so far

View SPHinTampa's profile


567 posts in 4977 days

#1 posted 10-18-2010 04:20 PM

Nice job … is the top 2 pieces of plywood covered by hardboard?

-- Shawn, I ask in order to learn

View Walt's profile


264 posts in 4130 days

#2 posted 10-18-2010 04:36 PM

The top of the table is two 3/4 inch MDF panels covered with 1/4 inch hardboard. The drilled post is a double thickness 3/4 in plywood with a hard wood cleat that slides on a poplar runner so I can support almost any length of boar for processing.
on the rear corner is a power strip so I can use power tools at the bench without having extention cords all over. It has 4 in locking/swiveling wheels so I can manuver it anywhere. The entire table is finished in Tung oil finish ( had some left over that was getting too old)
There are holes cut in the top in line with the vise for bench dogs or Rockler bench cookie risers

-- Walt Wilmington Delaware, http://[email protected]

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics