Tablesaw Outfeed Table

  • Advertise with us
Project by Brett Gallmeyer posted 10-13-2010 03:41 AM 37965 views 55 times favorited 20 comments Add to Favorites Watch

Here is my outfeed table I completed a while back. The base is made out of recycled lumber from pallets.
The top is a torsion box made from 1/2” mdf. I have drawers on both side one of which is designated for my saw blades and accessories. Its very robust!

20 comments so far

View C_PLUS_Woodworker's profile


602 posts in 3957 days

#1 posted 10-13-2010 04:09 AM

Really nice…........great storage and detail work.

View a1Jim's profile


118161 posts in 4626 days

#2 posted 10-13-2010 04:16 AM

Very nice outfeed table


View TheGravedigger's profile


963 posts in 5073 days

#3 posted 10-13-2010 04:21 AM

Outfeed table? Shucks, you’ve got a full-fledged workbench, or at least a top-notch assembly table. Really nice.

-- Robert - Visit my woodworking blog:

View Brandon's profile


4381 posts in 4001 days

#4 posted 10-13-2010 05:35 AM

Looks great! I must admit that I’m jealous by all that space you have.

-- "hold fast to that which is good"

View AttainableApex's profile


347 posts in 3882 days

#5 posted 10-13-2010 08:07 AM

ya if i had the space mine would be very similar.
i going to build a torsion box out feed table on hinges once i can get some free time.
where did you get the pallets from?
i never thought of using them, is it hard to get clean wood?

-- Ben L

View Splinterman's profile


23074 posts in 4411 days

#6 posted 10-13-2010 09:25 AM

Hey Brett,
Sweet multi-functional T/S addition….good job.

View mafe's profile (online now)


13053 posts in 4139 days

#7 posted 10-13-2010 10:24 AM

Wonderful, thats a table to die for!
And in my litte shop to die from…
Best thoughts,

-- MAD F, the fanatical rhykenologist and vintage architect.

View Ken90712's profile


17984 posts in 4238 days

#8 posted 10-13-2010 02:13 PM

Great Table! I use the same saw. Which I had the room to have a monster like this. Nice work.

-- Ken, "Everyday above ground is a good day!"

View Kent Shepherd's profile

Kent Shepherd

2718 posts in 4336 days

#9 posted 10-13-2010 03:38 PM

Good-looking table



View RexMcKinnon's profile


2593 posts in 4245 days

#10 posted 10-13-2010 07:43 PM

Nice outfeed table.

-- If all you have is a hammer, everything looks like a nail!

View SawdustEngineer's profile


69 posts in 3832 days

#11 posted 10-14-2010 01:45 AM

Outstanding work! This type of bench is what I’m planning to build when I get my latest honey-doos done. Great work indeed. Mitch

-- Mitch, Prince George VA

View Manitario's profile


2818 posts in 3932 days

#12 posted 10-14-2010 03:41 AM

Great looking table.

-- Sometimes the creative process requires foul language. -- Charles Neil

View Bob A in NJ's profile

Bob A in NJ

1344 posts in 5048 days

#13 posted 10-14-2010 05:44 AM

Man, I love that table, great design. Great re-use of wood. Wish I had the room for that. Nice drawers. I have the same saw but came up with another (space saving) solution.


-- Bob A in NJ

View Brett Gallmeyer's profile

Brett Gallmeyer

39 posts in 3916 days

#14 posted 10-16-2010 02:33 AM

Bob, I did the same thing when i had my saw in a 2 car garage. except I had a 36” hinged piece off the back.

View Roger's profile


21053 posts in 3853 days

#15 posted 10-16-2010 02:37 AM

Great outfeed Brett. Nice use of recycling also. Being a torsion box, I know it’s nice and stout, and should be flat like pancake…

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. [email protected]

showing 1 through 15 of 20 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics