LumberJocks

Mahogany Garden Table

  • Advertise with us
Project by TheJoineryGallery posted 09-30-2010 03:08 PM 2255 views 4 times favorited 11 comments Add to Favorites Watch

This was my first attempt to document a project as it evolved. Im sure I was shuolders deep in thought and forgot to stop photograph the stage and take notes. Either eay the piece is finished in three days flat. Better details on my site www.thejoinerygallery.com
Link stratight to the Garden table page-
http://thejoinerygallery.com/current-work/the-garden-table/

-- www.thejoinerygallery.com





11 comments so far

View DaddyZ's profile

DaddyZ

2475 posts in 4115 days


#1 posted 09-30-2010 03:23 PM

Nice Table !! Welcome

-- Pat - Worker of Wood, Collector of Tools, Father of one

View Cozmo35's profile

Cozmo35

2200 posts in 4111 days


#2 posted 09-30-2010 03:26 PM

I really like the way the top looks to be floating. Nice work and WELCOME.

-- If you don't work, you don't eat!.....Garland, TX

View helluvawreck's profile

helluvawreck

32122 posts in 3941 days


#3 posted 09-30-2010 03:28 PM

That’s a very nice table and you did an excellent job on it. You also have a very nice web site.

Welcome to Lumberjocks. You’ll love it here.

-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com

View HalDougherty's profile

HalDougherty

1820 posts in 4312 days


#4 posted 09-30-2010 03:29 PM

Beautiful table. I admire your hand cut mortises. When I don’t use a jig and router, mine look like they were chopped by a chimp with a hangover… My first woodworking project was for my first grandchild’s cradle. The side rails had a total of 60 mortises. After that, I made a jig to take a square spindle and turn a round tenon on each end that fit the 3/8” hole I drilled with my drill press. It was a lot easier to round a square peg than it was to square up a round hole. LOL The first set of side rails I made took two days, the last one I built took less than two hours to make the rails.

-- Hal, Tennessee http://www.first285.com

View spaids's profile

spaids

699 posts in 4768 days


#5 posted 09-30-2010 04:05 PM

This is full of AWESOME!

-- Wipe the blood stains from your blade before coming in.--

View dub560's profile

dub560

628 posts in 3988 days


#6 posted 09-30-2010 04:12 PM

great workmanship

-- Life is enjoyable especially when you borrow from people

View Jonathan's profile

Jonathan

2609 posts in 4125 days


#7 posted 09-30-2010 04:42 PM

Great table! I always love the floating top effect.

I look forward to seeing more of your work in the future.

Welcome to LumberJocks!

-- Jonathan, Denver, CO "Constructive criticism is welcome and valued as it gives me new perspectives and helps me to advance as a woodworker."

View mmh's profile

mmh

3684 posts in 4797 days


#8 posted 09-30-2010 05:53 PM

Very handsome table. I really like the lines of shaker and modern slim lined designs.

-- "They who dream by day are cognizant of many things which escape those who dream only by night." ~ Edgar Allan Poe

View Abbott's profile

Abbott

2570 posts in 4378 days


#9 posted 09-30-2010 05:57 PM

That is really nice. Welcome to Lumberjocks!

-- Ohh mann...pancakes and boobies...I'll bet that's what Heaven is like! ♣ ♣ ♣ ♣

View mafe's profile (online now)

mafe

13173 posts in 4164 days


#10 posted 09-30-2010 08:00 PM

Really beautiful table, welcome here.
Best thoughts,
MaFe

-- MAD F, the fanatical rhykenologist and vintage architect.

View TheJoineryGallery's profile

TheJoineryGallery

30 posts in 3879 days


#11 posted 09-30-2010 08:36 PM

Haldougherty-
Other than labor, through mortises are easier than you would think, my approach is to make the blank oversized by a 1/16 or so, and hand plane any chip out once the mortise has been cut. Plus work form either side toward the middle helps too. Just make sure you reference your mortising gauge on the same side so the joint is 90 degrees all around.

Thank you all for commenting!

-- www.thejoinerygallery.com

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com