Cup Holder & Box

  • Advertise with us
Project by DaddyZ posted 09-27-2010 04:35 PM 3401 views 5 times favorited 14 comments Add to Favorites Watch

Commisioned Piece, Going in Vehicle, Made from Cherry & Unknown Woods. Box Approx 7” x 10” x 3”using splined miters & butt joints, Cupholder morticed together with turnings

Think he will like? My own Inlay Design( I create my own, why buy when you can build)

Finally got this done after 4 Months( I Can’t work in the Heat(Non-cooled Shop))!!!

This Morning it was 46 degrees


-- Pat - Worker of Wood, Collector of Tools, Father of one

14 comments so far

View Chauncey's profile


17 posts in 3473 days

#1 posted 09-27-2010 04:39 PM

Nice box and inlay detail. I like the detail on the cup holder too. I think he will like!

View Ken90712's profile


17781 posts in 3724 days

#2 posted 09-27-2010 05:07 PM

Nice work, color looks good as well.

-- Ken, "Everyday above ground is a good day!"

View Chip's profile


1904 posts in 4628 days

#3 posted 09-27-2010 05:35 PM

No question the client will like these! Great job on both and the homemade inlay is very impressive too. Thanks for letting us see them.

-- Better to say nothing and be thought the fool... then to speak and erase all doubt!

View davevan's profile


54 posts in 3398 days

#4 posted 09-27-2010 06:00 PM

Beautifully done

-- Dave Arizona

View CharlieM1958's profile


16284 posts in 4753 days

#5 posted 09-27-2010 06:18 PM

The box is great, and the cup older is even better!

-- Charlie M. "Woodworking - patience = firewood"

View Dennisgrosen's profile


10880 posts in 3650 days

#6 posted 09-27-2010 07:36 PM

huu some realy niiice things for a truck
I know I wood have been proud of having
such beautyfull tings in my truck
in those days when I hit the concrete
down thrugh europe

well done

View Karson's profile


35207 posts in 4936 days

#7 posted 09-27-2010 09:19 PM

Nice use of small and short pieces. I usually try and buy my boards in bigger pieces. LOL

A great design. I like the Inlay stripes.

I’ve got a book on making inlays, but haven’t tried any yet.
I picked up a bunch of inlays on eBay about 6 years ago.

-- I've been blessed with a father who liked to tinker in wood, and a wife who lets me tinker in wood. Appomattox Virginia [email protected]

View LEITH's profile


175 posts in 3393 days

#8 posted 09-28-2010 02:11 AM

Very nice! I need one for my truck. Great work.


View tomd's profile


2212 posts in 4305 days

#9 posted 09-28-2010 06:13 AM

Very unique banding, nice color combo.

-- Tom D

View blacknail's profile


153 posts in 3340 days

#10 posted 09-28-2010 07:19 AM

Very nice! I saw 46* and thought you must be a neighbor. Sounds like the weather here…loving it!

-- Darrell B.

View jockmike2's profile


10635 posts in 4782 days

#11 posted 09-28-2010 05:35 PM

Great job, love the grain, inlay and finish. Very rich looking cup holder too. That would look good in my boat.

-- (You just have to please the man in the Mirror) Mike from Michigan -

View clarkey's profile


468 posts in 3591 days

#12 posted 01-28-2011 03:50 AM

Looks great!!!!!

View bigike's profile


4057 posts in 3824 days

#13 posted 01-28-2011 01:31 PM

wow the box came out real nice, and the cup holder is saweeeeeeeeeeet.

-- Ike, Big Daddies Woodshop, http://[email protected]

View itsmic's profile


1419 posts in 3654 days

#14 posted 02-01-2011 03:35 AM

Nice job, beautiful wood and eye catching design, man, we have the opposite problem, here in Maine it’s so darn cold I can’t deal with more than 20 minuets at a time, it’s 7 degrees right now, thanks for sharing

-- It's Mic Keep working and sharing

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics