Rolling Pin

  • Advertise with us
Project by English posted 05-05-2018 06:59 PM 1004 views 0 times favorited 4 comments Add to Favorites Watch

I made this rolling pin to Compliment the Plaid cutting board. The roller is made of maple, walnut, cherry, and paduck. The handles are walnut with a poplar shaft. The shaft was turned down a 1/16” and finished with lacquer and a walnut recessed button on the end. The roller turns quite freely in the walnut handles. The handles are finished with polyurethane. The roller is finished with mineral oil.

-- John, Suffolk Virgina

4 comments so far

View DMiller's profile


537 posts in 1249 days

#1 posted 05-05-2018 09:15 PM


-- Dale Miller Modesto, CA "I can do all things through Christ, which strengtheneth me." Philippians 4:13. "Woodworking minus patience equals firewood."

View ralbuck's profile


6547 posts in 3043 days

#2 posted 05-06-2018 02:26 AM

Man you pinned that one!

Great looking set!

-- Wood rescue is good for the environment and me! just rjR

View Ivan's profile


15969 posts in 3644 days

#3 posted 05-06-2018 11:02 AM

Pretty cool roller!

-- Ivan, Croatia, Wooddicted

View helluvawreck's profile


32122 posts in 3643 days

#4 posted 05-06-2018 05:18 PM

You did a very nice job on this rolling pin. Congratulations.

-- helluvawreck aka Charles,

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics