LumberJocks

Kitchen/utility knife

  • Advertise with us
Project by John posted 04-09-2018 12:16 AM 657 views 0 times favorited 3 comments Add to Favorites Watch

The blade was part of an old hedge trimmer and the handle is walnut with some crushed obsidian thrown in for fun it goes all the way through the slot in the blade and I’m hoping it will work like a pin. I sanded till my arm hurt then rubbed in 3 coats of Watco teak oil.





3 comments so far

View rodneywt1180b's profile

rodneywt1180b

181 posts in 834 days


#1 posted 04-09-2018 01:37 AM

It’s a cool idea. If the obsidian is mixed with epoxy I would expect it to work well for many years.
Rodney

-- Rodney, Centralia, WA, USA www.etsy.com/shop/ASturdyStick

View DMiller's profile

DMiller

490 posts in 921 days


#2 posted 04-09-2018 03:39 AM

Nice!

-- Dale Miller Modesto, CA "I can do all things through Christ, which strengtheneth me." Philippians 4:13. "Woodworking minus patience equals firewood."

View John's profile

John

37 posts in 2582 days


#3 posted 04-09-2018 05:08 AM


It s a cool idea. If the obsidian is mixed with epoxy I would expect it to work well for many years.
Rodney

- rodneywt1180b


It is. You have some very nice canes/walking sticks in your store. I have also been working on a hiking stick for my wife. The main shaft is vine maple with a piece of burl walnut at the top.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com