LumberJocks

Live Edge Bartop - Sofa Bar

  • Advertise with us
Project by Gregg M. posted 04-07-2018 09:55 PM 874 views 1 time favorited 2 comments Add to Favorites Watch

This was a custom project for a home theater. The owner wanted a custom bartop that would sit behind a large couch which was directly in front of their home theater screen. We settled on a design that would allow bar stools to sit under the bartop at a normal bartop height of 43”. The bartop is 8’ long. The A-frame legs are joined using loose tenons (domino) connected by a long strecher on the bottom that is joined with a keyed mortise and tenon and a long top support that fits into a notch. The piece is designed to knock down so that it can be easily transported. The bartop is a 2’ live edge slab. The bar was made uses three 10’ 8/4 slabs of walnut. The finish is General Finishes Arm-R-Seal with 3 coats on all parts and 5 coats on the bar top.

The slabs were purchased from Second Chance Hardwoods in Elkton, MD.

-- Marvel Woodworking, West Chester, PA - http://www.MarvelWoodworking.com





2 comments so far

View Jim Jakosh's profile

Jim Jakosh

23387 posts in 3618 days


#1 posted 04-08-2018 12:05 AM

Great looking live edge bar, Gregg!!

Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View Gregg M.'s profile

Gregg M.

216 posts in 2195 days


#2 posted 04-12-2018 11:39 PM

Thanks Jim


Great looking live edge bar, Gregg!!

Jim

- Jim Jakosh


-- Marvel Woodworking, West Chester, PA - http://www.MarvelWoodworking.com

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com