LumberJocks

Outfeed table for Sawstop Professional tablesaw

  • Advertise with us
Project by emtwoodworker posted 03-25-2018 08:56 PM 5332 views 10 times favorited 10 comments Add to Favorites Watch

I recently completed this outfeed table. The top is black laminate to match the factory extension wing. The legs are 1 inch square tubing with self leveling feet.
Brackets I used to attatch legs https://www.amazon.com/gp/product/B0725X9HRR/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1





10 comments so far

View Joe's profile

Joe

527 posts in 1857 days


#1 posted 03-25-2018 09:46 PM

I like your off feed table. I have Saw Stop Contractor Saw and your design would certainly add to my saw. Great Job!

-- CurleyJoe, "You only learn from your mistakes"

View bacoach's profile

bacoach

17 posts in 1276 days


#2 posted 03-26-2018 12:30 AM

Thanks for sharing..some good options as I design one for my 113..I am sure that it adds to your workspace.

-- BAcoach, Tennessee

View pintodeluxe's profile

pintodeluxe

6150 posts in 3583 days


#3 posted 03-26-2018 04:28 PM

Looks like a winner. Nice Job.

-- Willie, Washington "If You Choose Not To Decide, You Still Have Made a Choice" - Rush

View moke's profile

moke

1556 posts in 3546 days


#4 posted 03-26-2018 05:38 PM

Very nice!! And considerably chaper that the saw stop version!

-- Mike

View helluvawreck's profile

helluvawreck

32122 posts in 3637 days


#5 posted 03-26-2018 07:04 PM

You have done a wonderful job on this out feed table and it will be a great addition to your shop.

-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com

View Rayne's profile

Rayne

1312 posts in 2309 days


#6 posted 03-26-2018 07:18 PM

I love this but the one thing holding me back from making my own is if this type of install will accommodate the overarm dust collector pipe that mounts to the rail. Did you adjust for that for a future install or just a normal mount to the rails? Great work on this.

View TrentDavis's profile

TrentDavis

44 posts in 3005 days


#7 posted 03-28-2018 05:05 PM



I love this but the one thing holding me back from making my own is if this type of install will accommodate the overarm dust collector pipe that mounts to the rail. Did you adjust for that for a future install or just a normal mount to the rails? Great work on this.

- Rayne


You can mount the overarm dust collection pipe so it is below rather than above the rear rail. That is what I did with mine since my outfeed table runs the entire length of my saw.

-- SawStop Users' Group: https://www.facebook.com/groups/sawstopusersgroup/

View Rayne's profile

Rayne

1312 posts in 2309 days


#8 posted 03-28-2018 07:18 PM


I love this but the one thing holding me back from making my own is if this type of install will accommodate the overarm dust collector pipe that mounts to the rail. Did you adjust for that for a future install or just a normal mount to the rails? Great work on this.

- Rayne

You can mount the overarm dust collection pipe so it is below rather than above the rear rail. That is what I did with mine since my outfeed table runs the entire length of my saw.

- TrentDavis

That is awesome. You are the first one I have seen do this. I couldn’t find anyone else have an outfeed table with this overarm still attached. I’ll be doing this swap this weekend. Thanks!

View TrentDavis's profile

TrentDavis

44 posts in 3005 days


#9 posted 03-28-2018 11:27 PM

The important thing is how the outfeed table mounts to the rear rail.

I used the hardware from SawStop for the 30” outfeed table which is made specifically for that. Call their service department at (503)582-9934 and they’ll help you dig up the part numbers. You’ll need the bracket, 6 bolts, and (I believe) 5 screws.

You can probably make something work no matter what you decide. Just be aware that the clamps that mount the pipe to the rear rail will stick up above the rail by about 1/4”

-- SawStop Users' Group: https://www.facebook.com/groups/sawstopusersgroup/

View PaulL's profile

PaulL

5 posts in 4028 days


#10 posted 05-20-2020 07:16 PM

Trent,

Your comment at the end of your post: ” Just be aware that the clamps that mount the pipe to the rear rail will stick up above the rail by about 1/4”, are you referring to the mounting bracket for the 30 inch outfeed table?

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com