Project by zombeerose | posted 03-22-2018 05:31 PM | 692 views | 1 time favorited | 4 comments | ![]() |
![]() |
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
4 comments so far
NotaJock
home | projects | blog
183 posts in 2155 days
#1 posted 03-22-2018 10:52 PM
Those are neat.
I’d appreciate a short description of how this was done.
-- Mike in SoCal, now East Texas
zombeerose
home | projects | blog
88 posts in 5211 days
#2 posted 03-24-2018 05:32 AM
Quick description about construction:
Laminate wood in alternating grain direction (like plywood, just thicker);
Use large diameter circle cutter to cut outer shape;
Use 1/4” smaller diameter circle cutter for inner waste;
Sand and apply finish.
On a side note, you can usually make 2 sets out of each lamination. The larger would work well for women while the smaller makes great gifts for girls.
-- Maximize - Your Time, Your Experiencies, Your Life, Yourself!
Woodbutcher3
home | projects | blog
462 posts in 3943 days
#3 posted 03-31-2018 01:32 PM
Wood Mag issue 237 Dec15/Jan16 pg 60 has an article on bracelets using hole saws.
-- Rod ~ There's never enough time to finish a project, but there's always time to start another one.
zombeerose
home | projects | blog
88 posts in 5211 days
#4 posted 11-20-2018 03:45 PM
TIP: don’t use hide glue because the heat from drilling and sanding can lead to joint separation. I won’t tell you how I found that out.
-- Maximize - Your Time, Your Experiencies, Your Life, Yourself!
Have your say...