End grain cutting board

  • Advertise with us
Project by wenge posted 03-22-2018 03:08 PM 2094 views 4 times favorited 4 comments Add to Favorites Watch
End grain cutting board
End grain cutting board No picture No picture No picture No picture No picture
Zoom Pictures

This is my take on the brick and mortar style cutting board. May look fairly simple but there were plenty of glue ups. Added one individual padauk brick for a nice accent among the sea of walnut bricks. Board ended up 12” square x 1.5”

4 comments so far

View Hazem's profile


270 posts in 2535 days

#1 posted 03-22-2018 03:22 PM


View JimRochester's profile


576 posts in 2901 days

#2 posted 03-22-2018 07:47 PM

I would have loved to see a picture of the entire board. Nice design.

-- Schooled in the advanced art of sawdust and woodchip manufacturing.

View therealSteveN's profile


9242 posts in 1861 days

#3 posted 03-22-2018 09:59 PM

Nice board. The single piece of Padauk adds a LOT of visual interest I hadn’t seen in other bricked boards.

I understand making the brick wall, but yours is Herringboned, how to do this inquiring minds ask? Plus your bricks look larger than most I have seen. What thickness was your stock?

-- Think safe, be safe

View wenge's profile


22 posts in 1513 days

#4 posted 03-23-2018 04:45 PM

@therealSteveN I’ll post a how to if I get a little more time. As far as brick size, they are quite small compared to standard brick/mortar boards. I finished them out just a little under 3/4”x1.5” actual= 21/32”x1-13/32” to get the mortar joints to line up correctly mortar joints are 3/32”.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics