Picture Frame #2

  • Advertise with us
Project by IantheTinker posted 03-07-2018 04:38 AM 1152 views 1 time favorited 2 comments Add to Favorites Watch

This picture frame is made to fit a standard poster, it is made from oak and has mitered corners with dowels through them at a 45 degree angle. I used the dowels because my ceiling is too low to put this frame in my spline jig on the table saw. It has chamfered edges and the oak has some old worm holes in various spots, adding to the charm in my opinion. I drilled two holes in the back at an angle so it could be hung on a wall. I used plexiglass (expensive stuff) instead of real glass.

Thank you for taking a look!


2 comments so far

View MilFlyer's profile


948 posts in 3167 days

#1 posted 04-04-2018 05:36 PM

Okay, just the fact that you have an X-wing in the frame makes this a win!!! Seriously, good lookin’ frame! Thanks for sharing!

-- VR, Richard "Fear is nothing more than a feeling. You feel hot. You feel hungry. You feel angry. You feel afraid. Fear can never kill you"--Remo Williams

View IantheTinker's profile


285 posts in 1622 days

#2 posted 04-04-2018 11:56 PM

Thank you, it weighs a good bit, lol.


Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics