Router Table and Fence

  • Advertise with us
Project by Paul66 posted 02-25-2018 05:14 AM 1935 views 2 times favorited 4 comments Add to Favorites Watch

I’ve been meaning to do this project for a while, and over the last few days I’ve found the time to get it done. I chose to replace the right stamped steel wing of my Delta 36-725 table saw with the router table. Using a rockler insert plate and kreg levelers I went about putting it together. Top is 3/4 inch MDF trimmed in oak. The fence is 3/4 ply with oak used as the movable part of the fence.

4 comments so far

View htl's profile


5162 posts in 1959 days

#1 posted 02-25-2018 12:09 PM

That’s really going to come in handy!!!
Nice job!!!

-- An Index Of My Model making Blogs

View therealSteveN's profile


5904 posts in 1374 days

#2 posted 02-25-2018 05:25 PM

How do you have the router mounted underneath, or is it just the MDF suspending the routers weight?

I ask because MDF has poor ability to keep from sagging if unsupported.

Looks very good though, that fence design if built square (from that last pic, it appears yours is) is a very good design, and you will be happy with it.

-- Think safe, be safe

View Paul66's profile


24 posts in 1285 days

#3 posted 02-25-2018 05:45 PM

The underside is a mini-torsion box, so hopefully that should counteract any potential sagging of the MDF

View helluvawreck's profile


32122 posts in 3666 days

#4 posted 02-25-2018 08:33 PM

You did a beautiful job on this router table.

helluvawreck aka Charles

-- helluvawreck aka Charles,

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics