Intarsia Horse

  • Advertise with us
Project by rmontoyau posted 02-15-2018 06:05 PM 916 views 0 times favorited 3 comments Add to Favorites Watch
Intarsia Horse
Intarsia Horse No picture No picture No picture No picture No picture
Zoom Pictures

This is an Intarsia Horse base on Kate wise design

To create this Horse is necessary a few tools, and a lot of patience.

First I started, sanding and preparing the wood (I used a 3/4 pine), print the design and glue on the wood pieces.

I used a scrollsaw (my favorite tool, it’s allow cut with pressition), to cut the wood and be sure that match all the pieces. This is the easiest part. Later start the hard work, start to sanding and molding the horse. I have a band sander but only use it to the molding, for the small (and not to small) details, I like to sand by hand.

Later o sandig and sanding and more sanding, i was happy con the final result.

I know that for intarsia the recomend is used diferent types of wood, I didn’t have the posibility at the moment so i used only one type of wood (pine), So i decided inked the wood.

So the result is that yo can see on the picture!
Please any comment, recomendation, are welcome!

Have a good day!

3 comments so far

View Dutchy's profile


3682 posts in 2904 days

#1 posted 02-15-2018 06:55 PM

A great one.


View Richard's profile


11309 posts in 3768 days

#2 posted 02-15-2018 10:01 PM

Very Nice Indeed & Well Done!

-- Richard (Ontario, CANADA)

View Ivan's profile


15851 posts in 3603 days

#3 posted 02-17-2018 07:30 AM

Looks alive to me – beautiful hair!

-- Ivan, Croatia, Wooddicted

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics