LumberJocks

Work bench

  • Advertise with us
Project by Orla posted 02-12-2018 07:59 PM 1759 views 0 times favorited 7 comments Add to Favorites Watch
Work bench
Work bench No picture No picture No picture No picture No picture
Zoom Pictures

Work bench/outfeed table. Made with spruce with a 3/4 inch plywood base topped with a 3/4 sheet of mdf. The mdf is encased with 1×3 pine edged and can be flipped when Its time for a fresh surface. Ive since added some shelves for the go to tools and hardware.

-- Work safe!





7 comments so far

View fivecodys's profile

fivecodys

1430 posts in 2032 days


#1 posted 02-12-2018 08:49 PM

That is a great addition to your shop!
Will be nice and flat for assembling projects too.

-- When you leave your shop for the night, make sure you can always count to 10.

View Bill_Steele's profile

Bill_Steele

515 posts in 2127 days


#2 posted 02-12-2018 09:42 PM

That is a really nice looking bench/outfeed support/assembly table! I wish I had the room for something like this in my shop. Is the top a torsion box design?

View therealSteveN's profile

therealSteveN

2885 posts in 970 days


#3 posted 02-12-2018 10:03 PM

Nice clean build, allows for drawers or cabinets below. You will enjoy that bench.

If however, you are like I am, you may need to build another soon. I can fill up a horizontal surface as quick as anyone.

-- Think safe, be safe

View helluvawreck's profile

helluvawreck

32086 posts in 3262 days


#4 posted 02-12-2018 10:06 PM

This is a very nice workbench. Congratulations. It will be a nice addition to your shop.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com

View Richard's profile

Richard

11274 posts in 3428 days


#5 posted 02-13-2018 12:21 AM



This is a very nice workbench. Congratulations. It will be a nice addition to your shop.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

- helluvawreck

Totally Agree!

-- Richard (Ontario, CANADA)

View ChrisK's profile

ChrisK

2034 posts in 3477 days


#6 posted 02-13-2018 04:01 PM

Very clean look, use it!

-- Chris K

View moke's profile

moke

1379 posts in 3172 days


#7 posted 02-13-2018 06:19 PM

Nice! That will work great!

-- Mike

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com