Mallard Intarsia

  • Advertise with us
Project by GaryCN posted 02-08-2018 02:21 PM 8518 views 0 times favorited 6 comments Add to Favorites Watch

My 1st attempt at Intarsia, plan from Kathy Wise book Intarsia woodworking projects (2007)

-- Quando Omni Flunkus Moritati

6 comments so far

View GR8HUNTER's profile


7776 posts in 1558 days

#1 posted 02-08-2018 03:22 PM

very nice first 1 is awesome …GREAT JOB :<))

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN

View Scott Oldre's profile

Scott Oldre

1128 posts in 4277 days

#2 posted 02-08-2018 11:59 PM

What blade do you use for this type of work?

-- Scott, Irmo SC

View oldnovice's profile


7644 posts in 4214 days

#3 posted 02-09-2018 04:31 AM

First time, sure?
That is very good for the first project!

-- "It's fine in practise but it will never work in theory"

View LittleBlackDuck's profile (online now)


5408 posts in 1666 days

#4 posted 02-09-2018 09:17 AM

Nice 1st. up job G’CN... Which distant cousin (or feel-oading offspring) posed for that?

Just not Elmer Fudd or Bugs… for your next project!

-- If your first cut is too short... Take the second cut from the longer end... LBD

View GaryCN's profile


476 posts in 4780 days

#5 posted 02-09-2018 07:41 PM

What blade do you use for this type of work?

- Scott Oldre

Flying Dutchman Spiral SPFE3 40 TPI, this blade requires more sanding on the back but is nice for the 3/4 to 1” thickness.

-- Quando Omni Flunkus Moritati

View Dutchy's profile


3793 posts in 3014 days

#6 posted 02-10-2018 08:00 PM

Very nice sir.


Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics