Project by ppworkshop | posted 01-31-2018 12:40 AM | 1484 views | 5 times favorited | 2 comments | ![]() |
![]() |
iPhone charging cables are frustratingly short, so I made an iPhone charger / holder to go on the wall. I used a small block of persimmon cut from a large slab I had on hand for the “holder” and a piece of walnut for the mounting plate. I used a mounting plate so I wouldn’t have visible fasteners, and so I could take it off the wall easily if I ever needed to move it. I’m not sure what to call the joinery (slot & tab?), but it was a lot of fun to make. I like projects where I have to solve a problem and balance form and function. I finished it with polyurethane.
Here is a link to the build video if you want more details: https://youtu.be/pLyM9_RMURI
-- Patrick Parson Workshop
2 comments so far
Ivan
home | projects | blog
17282 posts in 4323 days
#1 posted 01-31-2018 02:47 PM
Beautiful combination of woodworking and modern technology.
-- Ivan, Croatia, Wooddicted
helluvawreck
home | projects | blog
32122 posts in 4322 days
#2 posted 01-31-2018 02:58 PM
This holder will work great with the charging cable.
helluvawreck aka Charles
http://woodworkingexpo.wordpress.com
-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com
Have your say...