Wine pour holder

  • Advertise with us
Project by Peteybadboy posted 01-30-2018 07:24 PM 1072 views 2 times favorited 4 comments Add to Favorites Watch
Wine pour holder
Wine pour holder No picture No picture No picture No picture No picture
Zoom Pictures

Here is a little project I have been making for friends as a house warming. I have made these for 1 , 2 or 5 wine pours.

No such thing as scraps, however this does reduce the cut off pile some.

Wood is curly maple, top is curly babinga. finished with a little transtint in shellac , then wipe on poly.

-- Petey

4 comments so far

View tyvekboy's profile


2030 posts in 3818 days

#1 posted 01-30-2018 07:27 PM


-- Tyvekboy -- Marietta, GA ………….. one can never be too organized

View helluvawreck's profile


32122 posts in 3672 days

#2 posted 01-31-2018 03:12 PM

Nice work!

helluvawreck aka Charles

-- helluvawreck aka Charles,

View KimAccurso's profile


511 posts in 945 days

#3 posted 08-25-2018 10:37 PM

Petey, I hope you get this message. I came across this searching – my brother in law as asked me to make him one for pourers that are almost the same as these. The one he ordered was too short for his pourers. I’m curious – what size forester bit did you use to drill the holes? The one he gave me has 7/8” holes but I’d have to order that size bit. I have 1” and 3/4” – one a bit too big and the other a little tight – I’m wondering if you used a 3/4” and if you find they are more secure than the 1”?? Any advice?

-- Kim - imperfection is the pursuit of perfection

View Peteybadboy's profile


2028 posts in 2755 days

#4 posted 08-26-2018 09:59 AM


I used a 1/8” bit and just put the stem of the pour in the hole.

-- Petey

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics