LumberJocks

Brick and Mortar Cutting Board

  • Advertise with us
Project by Bliss Woodshop posted 01-29-2018 07:02 PM 1984 views 5 times favorited 11 comments Add to Favorites Watch

Started a New Years resolution to dedicate and improve my woodworking skills. This cutting board is part of it. I was going for a brick and mortar look and looks like I achieved it.

Be Bliss,
MVar.

-- Be Bliss. @blisswoodshop on IG





11 comments so far

View doubleDD's profile

doubleDD

9640 posts in 2892 days


#1 posted 01-29-2018 07:23 PM

Bliss,you did a fine job. Achievement well done. I like the inserted handle.

-- Dave, Downers Grove, Il. -------- When you run out of ideas, start building your dreams.

View Richard's profile

Richard

11309 posts in 3882 days


#2 posted 01-29-2018 08:19 PM

Very Nice and Well Done Bliss!

-- Richard (Ontario, CANADA)

View Andre's profile

Andre

3695 posts in 2655 days


#3 posted 01-29-2018 08:44 PM

Love it! What woods, is the dark wood end grain? Like the handles. I usually try for the not so obvious but yours look so good!

-- Lifting one end of the plank.

View recycle1943's profile (online now)

recycle1943

4704 posts in 2471 days


#4 posted 01-29-2018 08:45 PM

you certainly accomplished your goal and did it very well !!

-- Dick, Malvern Ohio - my biggest fear is that when I die, my wife sells my toys for what I told her I paid for them

View Bliss Woodshop's profile

Bliss Woodshop

70 posts in 3435 days


#5 posted 01-29-2018 09:15 PM

This board is made of paduck and Ash. The paduck is the reddish and Ash is the light coloured one. Board is mostly endgrain, expect the 6 long straight Ash stripes. The edge grain Ash strip was glued up on the second phase of glue up.

Hope that cleared any doubts.


Love it! What woods, is the dark wood end grain? Like the handles. I usually try for the not so obvious but yours look so good!

- Andre


-- Be Bliss. @blisswoodshop on IG

View Scott Oldre's profile

Scott Oldre

1128 posts in 4281 days


#6 posted 01-29-2018 11:33 PM

Nailed it. Love the red brick with the yellows.

-- Scott, Irmo SC

View KimAccurso's profile

KimAccurso

511 posts in 989 days


#7 posted 01-30-2018 12:38 AM

I love this cutting board!! Great job and creativity. What type of bit did you use to do the handles?? They look great!

-- Kim - imperfection is the pursuit of perfection

View Bliss Woodshop's profile

Bliss Woodshop

70 posts in 3435 days


#8 posted 01-30-2018 03:45 AM

Used a 1/4 inch round over bit for making the handles using pantorouter with a custom template. Then “little” bit of sanding afterwards. Looking to get a 1/2 inch round over bit.


I love this cutting board!! Great job and creativity. What type of bit did you use to do the handles?? They look great!

- KimAccurso


-- Be Bliss. @blisswoodshop on IG

View helluvawreck's profile

helluvawreck

32122 posts in 3716 days


#9 posted 01-30-2018 03:52 PM

This is a rich looking cutting board and I love the pattern.

helluvawreck aka Charles
http://woodworkingexpo.wordpress.com

-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com

View Ivan's profile

Ivan

16221 posts in 3717 days


#10 posted 01-30-2018 07:56 PM

What a match!

-- Ivan, Croatia, Wooddicted

View handmadewithashley's profile

handmadewithashley

75 posts in 1146 days


#11 posted 02-03-2018 03:08 AM

Nice! that looks beautiful. I really want to try making brick and mortar cutting board soon. :)

-- Ashley, Alabama, Instagram - @handmadewithashley, https://www.youtube.com/handmadewithashley, http://www.ashleygrenon.com

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com