What does a Chicago Cubs fan do with some oak cutoffs

  • Advertise with us
Project by Rwolinski posted 01-29-2018 12:18 PM 1979 views 0 times favorited 2 comments Add to Favorites Watch

Well Last Christmas I received a Cubs hammer from my nieces family. I’m only one of three or four Cubs fans in the extended family of about 40. I had some short Oak pieces laying around from another project so I put this little shadow box together and then decided to dress it up with some battery LED lights off of Amazon. I had apiece of plexiglass so put the lights in right behind it with some hot glue dabs between the LED’s
All I did was run a saw kerf then make a deep rabbet to mount the sides and then screwed on the top and bottom locking it all together. I put the control on the bottom in a recess with some velcro so can change the batteries if needed.

-- What I make is for others....How I make it is for me.

2 comments so far

View at anchor in Orlando's profile

at anchor in Orlando

76 posts in 2512 days

#1 posted 01-29-2018 05:50 PM

lifelong CUBS fan, I’d hang it in my shop if it didn’t have the lights, wires, and hotglue…

-- Jack

View Richard's profile


11310 posts in 4318 days

#2 posted 01-30-2018 12:12 AM

Very Nice Work & Well done!

-- Richard (Ontario, CANADA)

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics