| Project by hairy | posted 01-09-2018 03:50 PM | 1427 views | 5 times favorited | 8 comments |  |
 |
2 for next Christmas. For the breadmaker in the family.
The first is for cutting homemade bread into 1/2” slices. The knife is held captive in the slot.
8 and 1/2” x 10” x 7/8” thick. QSWO with Watco Danish oil
The 2nd is from scraps. 12” x 18” x 1 and 3/8” thick. Mineral oil and wax.
Each comes with a new bread knife.
The 1st one is real easy to make. Made from two 8” x 10” pieces. I cut dadoes first, then cut 1/8” slots on the router table in several passes between stops. I’m tempted to make 1 for me.
-- My reality check bounced...
8 comments so far
Snowbeast
home | projects | blog
108 posts in 1790 days
#1 posted 01-09-2018 05:13 PM
Nicely done!
Another one I will have to ‘creatively acquire’. Steal is such a negative term. ;)
helluvawreck
home | projects | blog
32086 posts in 3318 days
#2 posted 01-09-2018 06:09 PM
These are very interesting projects and are so nicely done. Hairy, they will make wonderful gifts.
helluvawreck aka Charles
http://woodworkingexpo.wordpress.com
-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com
Andre
home | projects | blog
2695 posts in 2258 days
#3 posted 01-09-2018 07:40 PM
Great project, another one for the to do list!
-- Lifting one end of the plank.
NormG
home | projects | blog
6439 posts in 3456 days
#4 posted 01-09-2018 09:57 PM
Great idea, thank you for sharing
-- Norman - I never never make a mistake, I just change the design.
Ivan
home | projects | blog
14785 posts in 3319 days
#5 posted 01-10-2018 10:02 AM
Actualy, very good idea!
-- Ivan, Croatia, Wooddicted
recycle1943
home | projects | blog
3129 posts in 2074 days
#6 posted 01-10-2018 01:49 PM
very nice bread board – you know there’s 100 guys heading to the wood shop right now and as soon as I finish this, that’s where I’m going
Just need to find an outlet for the bread knife
-- Dick, Malvern Ohio - my biggest fear is that when I die, my wife sells my toys for what I told her I paid for them
hairy
home | projects | blog
2887 posts in 3984 days
#7 posted 01-10-2018 02:01 PM
Thank you all!
I bought 1 of these from ebay for the cutting board. I saw it get a good review on a PBS show.
https://www.ebay.com/itm/Mercer-Culinary-Millennia-10-Inch-Wide-Bread-Knife/122793810533?epid=2256469271&hash=item1c9714da65:g:neIAAOSwYeRZ~2Zv
I got this for the slicer. I ordered it on Jan. 4, it was on my front porch Jan 5.
http://www.cutleryandmore.com/victorinox-forschner-fibrox/serrated-slicing-knife-p13533
-- My reality check bounced...
Richard
home | projects | blog
11291 posts in 3485 days
#8 posted 01-10-2018 05:56 PM
Well Done and Presented! Congrats on the Top Three!
-- Richard (Ontario, CANADA)
Have your say...