| Project by Dan Tindall | posted 01-03-2018 11:26 PM | 1624 views | 3 times favorited | 4 comments |  |
 |
From the better late than never department!
I’ve been out of the shop for over a year as I work on my Master’s Degree so it was good to get a break and get back to this project.
This is the Miter Saw station that was featured in the Aug/Sept 2013 Woodcraft magazine. I was fun to build and I’ve already enjoyed having a dedicated workstation to house my saw.
My modifications included a “dust hood” that is covered with 1/4” clear plastic sheeting to help keep the extra dust inside the station. Additional modification was a 4” dust port and dust trap below the saw and out the back of the stand so that I could connect my dust collector to it.
Still need to add a measuring tape strip to each of the wings but that is a project for a different day.
4 comments so far
Tom O'Brien
home | projects | blog
120 posts in 4961 days
#1 posted 01-04-2018 03:05 AM
The miter saw station looks great, Dan!
Next project could be a nice Frame for your Diploma!
-- Every project is a learning opportunity, every error a design opportunity
drewpy
home | projects | blog
1046 posts in 2373 days
#2 posted 01-04-2018 04:43 AM
Nice miter saw station. This is on my list for 2018.
I agree with Tom, get that diploma and build a frame.
-- Drew -- "The greatest wealth is health".
helluvawreck
home | projects | blog
32122 posts in 3883 days
#3 posted 01-04-2018 03:01 PM
This is a nice looking miter saw station. Congratulations.
helluvawreck aka Charles
http://woodworkingexpo.wordpress.com
-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com
hoss12992
home | projects | blog
4178 posts in 2909 days
#4 posted 01-04-2018 07:39 PM
Looks good. I’m sure you will get lots of use. A good miter saw station sure makes life
-- The Old Rednek Workshop https://www.facebook.com/theoldrednekworkshoptn
Have your say...