Cherry Side Table

  • Advertise with us
Project by ixj posted 12-29-2017 09:53 PM 1164 views 4 times favorited 4 comments Add to Favorites Watch

I made this small cherry side table for a sitting area in our kitchen that my wife is setting up. Its 14×22 1/2 inches and stands 26 inches tall. The shelf is about 9 inches below top.

Everything is constructed from 3/4” material, with the legs glued up from 2 boards. The legs have a small taper down to 1” at the bottom, and are attached to the aprons using dowel joints. The top and shelf are attached using table top clips.

I pre-finished the pieces before assembly because I wouldn’t have been able to get the shelf installed after the glue-up. The frame as 4 coats of wipe-on-poly, and I applied 5 coats to the top and shelf.

4 comments so far

View BB1's profile


1652 posts in 1647 days

#1 posted 12-30-2017 02:17 AM

Like the design. Looks great!

View Oaker's profile


55 posts in 2133 days

#2 posted 12-30-2017 03:18 AM

Looks great and I love the Cherry.

-- Larry - Illinois

View pottz's profile


10240 posts in 1783 days

#3 posted 12-30-2017 05:02 AM

simple and clean design,plus I love cherry.nice job!

-- working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.

View helluvawreck's profile


32122 posts in 3665 days

#4 posted 12-30-2017 02:33 PM

This leg table is so nice and beautifully done.

helluvawreck aka Charles

-- helluvawreck aka Charles,

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics